I'm going to lower my car and I really like the drop that 350z H-tech springs give on the front but don't like the uneven drop and don't want to do the spring mount mod. What are some springs that will give me an even drop similar to the 350z h-tech just without the angled (lower front than back)? I don't want S-tech because that's too low.

anyone?

Try the G/Z combo or the Eibach Pro-Kit. I have looked at all the possibilities for my car and still can't decide.

Also check out this thread if you haven't. LOTS of ideas and info.

https://g35driver.com/forums/g35-sed...on-thread.html

most springs will have some sort of front to rear rake to them, I went with the Cobb springs and its a little lower in the front than the H-techs, Im actually considering finding a front pair of H-techs to swap out with mine to see if it levels it out a bit.

Thanks but I don't have a sedan and drops on coupes are very different. I'm going to look into the G/z combo but does anyone have a specific set of springs that is an even drop all around but not as low as s-techs.

Anyone know a set?

I looked into some but most seem to be a 1" drop all around with softer rating...

Swift Mach springs for the 350. I'm on them and love them

saw your pictures and it looks like a really nice drop, how much clearance do you have (finger wise) on front and rear?

i went with new tires with 30 for the sidewalls...now i have 2 finger gap in the rear and about 1.5 finger in front...in the pics i had 35 sidewalls and had a 1 finger gap all around, but had to swap out to 30s due to rubbing