Well, I am finally parting out and have my VRT bar for sale. LMK if interested or check out my thread in the classifieds. :-)

 

BigC

do you run the spacer on your Cosworth to clear aftermarket injectors?

Thanks,

George

 

no spacer was needed with my old DW 600cc injectors or my current EV14 900cc injectors.

 

I hope this thread Is still relevant

If I need to update the first pages, please PM me

Adrian

 

Holy hell A, you still hang around? Not many of us old-timers are here any more. Hope all is well in your world!

 

All of these front bars list as 03-06, I have an 07 coupe. Is there something I should be aware of ? I'm looking at the circuit alutec bar specifically.

 

No worries on the 07 fitment. Any of the strut bars will fit fine.

 

Cool, thanks!

 

Have the Megan Racing FSB on my car, I believe it was around $90 through THMotorsports. Easily clears a 5/16th inch plenum spacer, looks like it would clear a 1/2". About 3/4ths inch either side adjust-ability for plenum spacers, but up too high and it will contact the underside of the hood. Mine is set up pretty low. Got to move some stuff out of the way on the driver's side to get the mounting bracket in place but no biggie. As usual with an FSB, it seemed to tighten up steering response a bit. Nothing major though.

 

Anyone know if the Megan Racing FSTB for the 09 G37 will have fitment problems on an 08 G35xS? It's p/n MR-SB-IG37FU-1P

 

That I don't know, you might want to post that up in the second gen sedan section.

 

03 Sedan; BC/BR Coilovers, MD 5/16 spacer, Furookie 3.5 CAI, Stillen STB, (Need to use provided spacer washers.) [GT Spec was discontinued.]
Rubs a bit if I don't use my cardboard spacer when installing everything & tightening everything in place.