Neg. Camber on stock height = Gayness

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 4, 2009 | 05:12 PM
  #1  
OnE BaD G35's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 662
Likes: 0
From: Chicago/South Texas
Neg. Camber on stock height = Gayness

Whats up everyone. After searching my behind off i decided to post a new thread and see if you guys can help me out. My coupe has never been dropped but for some reason the rear driver side wheel has a very noticable amount of neg camber. It doesnt really bother me much other than it not being normal and that side of the car being alot lower than the other sides. Anyone know what gives? Im not sure if it matters but i have oem 18's all around. Thanks alot guys in advance and if pictures are really really needed then ill make sure to post some. Thanks
 
Reply
Old Jun 4, 2009 | 05:17 PM
  #2  
MikeYo's Avatar
Registered User
iTrader: (37)
Joined: Dec 2007
Posts: 3,577
Likes: 12
From: South Florida
Your car came with neg camber just like everybody else. Unless your alighnment is messed up, your only running -1 degree max. I'd like to know how that's obvious to your eye... I run -4 degrees rear and that's what I'd call noticeable camber
 
Reply
Old Jun 4, 2009 | 05:20 PM
  #3  
OnE BaD G35's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 662
Likes: 0
From: Chicago/South Texas
Ok i have to be having an alignment problem then because the neg. camber on that one wheel is very noticable. My car seems to lean to the left rear corner because the camber is so bad. Damn it!
 
Reply
Old Jun 4, 2009 | 05:25 PM
  #4  
MikeYo's Avatar
Registered User
iTrader: (37)
Joined: Dec 2007
Posts: 3,577
Likes: 12
From: South Florida
I'd recommend a alignment for starters
 
Reply
Old Jun 4, 2009 | 05:26 PM
  #5  
OnE BaD G35's Avatar
Thread Starter
|
Registered User
Joined: Nov 2007
Posts: 662
Likes: 0
From: Chicago/South Texas
Alright thanks alot.
 
Reply
Old Jun 4, 2009 | 07:55 PM
  #6  
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
if it is noticeably different, you may have bent the camber arm on that side somehow
 
Reply
Old Jun 5, 2009 | 02:39 PM
  #7  
ttrank's Avatar
Grocery getter
iTrader: (57)
Joined: Jul 2005
Posts: 27,305
Likes: 190
From: Phoenix
Premier Member

+1

Have you had it checked yet? Most shops do a free check.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 11:25 AM
nascarbuff17
G35 Coupe V35 2003 - 07
5
Jul 16, 2015 10:23 AM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 02:48 PM.