Right now my sedan is sitting on the tanabe DF210 coupe springs. The problem is my rear sits waay lower than my front does. I was thinking of maybe swapping out the rears for the sedan springs but I dont want to spend the money if the difference in ride height won't be noticeable. So if anyone has any experience with this setup or would like to give me some feedback please do.

PS. I have posted pics of my cars drop on this site so if want to see the difference in ride height the pictures are on here.

 

Tanabe NF210 G35 SEDAN progressive springs 1.6”/.9” drop
Spring rates in LBS 297/269

Notice the drop spec, the rear drops .7" less then the front. Easiest solution is to buy a set of used 03 350Z springs and install the rear springs in place of your NF210 rear springs. Though IMO, you bought springs that are too soft to lower on.

Curious, sport suspension or not?

 

Im not sure if its the sport suspension or not. My shocks are red thats all I know. And by the way I have DF not NF but thank you for the reply anyway.

 

Sorry off topic.. But how bad was your camber?? with the DF210

 

^^ Pretty severe. But I installed the SPC front and rear camber kit at the same time I put on the springs so I couldn't for sure tell you how bad it is with just the springs. But you'll need a camber kit for sure with these springs.

 

I can sell you both rear sedan sport springs if you want them.

Also, how would KYB GR2 shocks pair with an aftermarket lowering springs, such as the DF210s?

 

^^ How much

 

Wait never mind. Do you mean just the stock sedan springs?

 

Yes, the stock sedan springs.