Rear Camber Kit Didn't Work.. HELLLPPPP
If you bought the Ichiba rear kit, it comes with toe bolts. Perhaps the shop that installed the kit didn't use the toe bolts correctly. Also, you will need to elongate the hole to get the maximum benefit of the toe bolt. Do you remember your alignment specs?
You shouldn't need to buy any toe bolts the ichiba camber kit should have the right bolts already for you to adjust the toe settings, just take it to any reputable shop and have them look at your camber kit.
Registered User
iTrader: (15)
Joined: Dec 2007
Posts: 2,163
Likes: 29
From: Rep'n Ohio in Houston,TX
No gaurantee they'll be there, but you could try that too - if they aren't in the showroom - there are two bays to the right of the store on the back side where the actual shop is located - try sticking your head in there and asking for Sal or Oscar - tell them your issue - they'll help you out - might need to make an appointment, but super nice guys
+11111, it goes onto the spring bucket arm...basically the arm that holds the spring. Also, your shop has to be aware that they have to grind and elongate the hole to compensate the extra adjustments that the SPC bolts were made for.
Heres the pics.. Sry about the quality and angle I had to take quick pics before i picked up my lil girl from daycare. Does it look like i have the aftermarket toe bolt installed because i dont want to buy one if i dont need it. Also can yall point it out 2 me.. As you can see the tires are messed up.









^that's not where the toe bolt should be. The SPC toe bolts should be somewhat cleaner/shiny depending on how long it's been on there. It's that bucket where it holds the springs... closer to the exhaust
also i called sals and jtran or whatever both have to order the toe bolt thats y i want to know if i already have it installed. Now im going to discounttire and order me some tires.






