anyone know the camber, toe specs for factory 03-07 coupes?
Joined: Oct 2003
Posts: 1,667
Likes: 1
From: Houston, TX
anyone know the camber, toe specs for factory 03-07 coupes?
I remember there was a sticky listing the OEM specs for the suspension setup for our cars on here. Can't seem to find it.
I know our cars come ship from the factory with negative camber dialed in. But I would like to know the complete specs.
I know our cars come ship from the factory with negative camber dialed in. But I would like to know the complete specs.
Front:
Camber -1.2 to 0.3
Toe 0.00 to 0.08
Rear:
Camber -1.8 to -0.8
Toe 0.00 to 0.22
Thats the spec range. You can go more negative in the rear. 350z factory camber spec is -2.08 to -1.08. So getting bit more camber isnt bad. Just try to zero out your toe.
Camber -1.2 to 0.3
Toe 0.00 to 0.08
Rear:
Camber -1.8 to -0.8
Toe 0.00 to 0.22
Thats the spec range. You can go more negative in the rear. 350z factory camber spec is -2.08 to -1.08. So getting bit more camber isnt bad. Just try to zero out your toe.
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
Jul 24, 2015 01:59 PM
