This is about an alignment but I'd figure it may be worthy to note my wheel setup. I recently bought and installed '07 coupe wheels and tires on my car and got an alignment. Wheels are staggered fyi. There are a few questions I had after I got an alignment. First, the shop couldn't get the toe and camber perfect. They mentioned that I need new control arm bushings and possibly a camber kit. If this is the case, this is what I planned on purchasing:


Would these help get my alignment into spec?

WHEEL SET UP:

FRONT: 225/50/17 7" 6 spoke
REAR: 235/50/17 7.5" 6 spoke

 

I have a 07 coupe and bought SPC camber kit for the front and rear.

 

what brand is the one above?

 

that will get your camber set, but youll need toe bolts to get the toe right

 

Will this do the trick?

http://www.importimageracing.com/mm5...&Store_Code=ii

 

^ for the rear it'll work but how low are you?? On coils or springs?? and 07 wheels you mean the forged oem rays??

 

I'm on all stock suspension (non-sport '03.0). '07 coupe wheels: 225/50/17 7" and 235/50/17 7.5". My car squeaks a lot more, I feel like I have more understeer with a staggered set up.

 

Stock suspension you should be able to get back in spec without aftermarket parts. And what was out of spec (camber, toe, caster) and on which wheels? If you want to get a rear camber kit get the ichiba or spc kit with the toe bolts.