ICHIBA front control arm.
#1
ICHIBA front control arm.
So I have ichiba control arms up front and now the front right is making a clicking noise when weight is transfered to that side whether it be braking, turning, bumps and even just turning the steering wheel to one side or the other.![52](https://g35driver.com/forums/images/smilies/52.gif)
It happens to be that that one of the bushings is worn out.
What bushings are compatible with it and where can i find it at?
![52](https://g35driver.com/forums/images/smilies/52.gif)
It happens to be that that one of the bushings is worn out.
What bushings are compatible with it and where can i find it at?
#2
Registered User
iTrader: (12)
Join Date: Jun 2009
Location: Louisville, KY
Posts: 533
Likes: 0
Received 0 Likes
on
0 Posts
You probably just need to ditch the Ichiba a-arms and go with SPC. This is why Ichiba is not recommended. I've seen bushing failures on their rear camber arms and now this is the first instance i've heard of a front a-arm bushing wearing out. Could you post pics? How exactly do you know it's the bushing?
Sorry, but I don't know if there are any aftermarket bushings compatable.
Sorry, but I don't know if there are any aftermarket bushings compatable.
#5
#6
Trending Topics
#8
Registered User
iTrader: (3)
Join Date: May 2009
Location: Bellevue, Ne
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
See if it's where the ball joint from the Ichiba arm goes into the stock arm piece. There may be play in it. I had to install a washer under the nut, then cotter pin it. It ended up pulling through and almost causing me to crash! It came completely apart lol. I had to have my car towed home. Sounds like the same problem. I needed a 10 cent washer on each side.
#9
Thread
Thread Starter
Forum
Replies
Last Post
Z1Motorsports
Suspension-Vendor
56
05-31-2020 01:56 PM
rezendvous420
G35 Sedan V35 2003-06
10
05-31-2020 01:26 PM