I'm installing an Eibach (which is really the SPC) front camber kit on my 05 G sedan but the black plastic part that is on the stud (that the castle nut goes on) and goes through the tapered hole on the curved part that holds the front hub/axle won't come off. I have a 3 jawed 2 ton puller and it won't budge. I called SPC but he said the part isn't included in the kit nor do they sell them....any ideas how to get this guy off??? I watched the vids on the kit install but nothing was mentioned about this.
Thanks!

 

that conical bushing is a biatch. I ended up just getting 2 new ones from oc Infiniti after trying to get it off for 2 hours. that's probably your best bet to save time and energy.

 

^This, some will pop off but most the time just get 2 new ones. I've only been able to get them off when i needed to maybe 25% of the time

 

Thanks for the info...sounds like it's not as bad as I thought..