Just got my car back from getting an oil change and was told I needed some bushing replacements, which I figured. Car is about to hit 100k and here's what I need:

• Rear Sway Bar End Link Bushings
• Oil Cooler Gasket
• Front Lower Control Arm Bushings
• Front Lower Control Radius Arm Bushings (Is this the Compression Rod bushing??)

I know I can get an oil cooler gasket from Nissan for a few bucks. I'm looking on Concept Z Performance for bushings and I'm just not sure what I need. They have a complete "front control arm bushing set" for $112.00, but I'm not sure if those address the parts I need.

Also, when looking for an endlink bushing, are they the Sway Bar bushings or are there specific "end link bushings" I need. Any help is really appreciate as I'm a new to the G. Thanks.

 

Without knowing, specific, year, coupe/sedan
Rear Sway Bar End Link Bushings are the twisted link bushings on each end of the
sway bar, look like tie rods, that have been twisted
Oil Cooler Gasket, yeah 21304-JA11A $4 or so
Front Lower Control Arm Bushings, (not sold seperately from Nissan/Infiniti)
Radius Bushings that is the bananna shaped arm (compression rod)Nissan does sell those seperately
54570-AC70A $27 or so

 

It's a 2003 sedan, 5AT if that helps.