Compression Rod Bushing ??
#1
Compression Rod Bushing ??
Ive been looking at post about what is the best thing to do aout replacing your compression rod bushing , But these post are all a bit old most being from 2011 . I was wondering if anyone finally came up with a good bushing that will last a long time and not create so much noise . Also im kind of leaning towards the Spl bushing has anyone here tried them out ???
#2
whiteline - stiffer, will last, will only make noise when it gets cold...like <40F
SPL - tried it, made tons of noise, spl didn't offer a solution beyond rubber o-rings that made no difference, def improved steering and braking feedback though as well as reduced steering effort.
pick your poison...
SPL - tried it, made tons of noise, spl didn't offer a solution beyond rubber o-rings that made no difference, def improved steering and braking feedback though as well as reduced steering effort.
pick your poison...
#4
#6
DO NOT listen to this advice
expect the following with Energy bushings, as there is no play and the compression rod bushing is an articulating point and requires flex, which whiteline and SPL bushings as well as OEM all offer.
Energy bushings:
more info here:
http://my350z.com/forum/brakes-and-s...oly-ftmfl.html
...your welcome
expect the following with Energy bushings, as there is no play and the compression rod bushing is an articulating point and requires flex, which whiteline and SPL bushings as well as OEM all offer.
Energy bushings:
more info here:
http://my350z.com/forum/brakes-and-s...oly-ftmfl.html
...your welcome
#7
Trending Topics
#8
#9
Registered User
iTrader: (10)
#10
Sorry to hear that do they really sound that bad ..most people including my mechanic said they do make noise but no one said it was nothing to great or loud . What bushings are you turning to OEM ???
#11
Registered User
iTrader: (10)
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
FS[NorEast]: New OEM G35x Compression Rods - Save!!
The Fixer
Steering & Suspension
15
11-01-2015 03:26 PM