G35 rotors

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 05-23-2019, 02:24 PM
Obeyxjason's Avatar
Registered User
Thread Starter
Join Date: Sep 2018
Location: Florida
Posts: 27
Received 0 Likes on 0 Posts
G35 coupe 6mt
G35 rotors

looking to get some rotors for my G35 any suggestions, I do have the Factory brembos on there it’s an 04, recently repainted my calipers and my front rotors are bad so I need to replace them and finish the look, here’s some pics just showing off the caliper/wheel setup

 
  #2  
Old 05-23-2019, 05:37 PM
cleric670's Avatar
BANNED!!!

Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes on 2,150 Posts
Coupe 6MT Premium RAS
Have you verified that your existing rotors CANNOT be turned? It will save you many hundreds of dollars if they can.
 
  #3  
Old 05-23-2019, 05:40 PM
Obeyxjason's Avatar
Registered User
Thread Starter
Join Date: Sep 2018
Location: Florida
Posts: 27
Received 0 Likes on 0 Posts
G35 coupe 6mt
I wouldn’t think so it’s slotted and drilled rotors and it’s to the point it’s not even slotted anymore and the holes are starting to show signs of cracking
 
  #4  
Old 05-23-2019, 05:45 PM
cleric670's Avatar
BANNED!!!

Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes on 2,150 Posts
Coupe 6MT Premium RAS
Ohh jeez, yeah you need new ones lol.
 
The following 2 users liked this post by cleric670:
Obeyxjason (05-24-2019), Scorpi0 (05-23-2019)
  #5  
Old 05-23-2019, 06:51 PM
Scorpi0's Avatar
Registered User
Join Date: Feb 2018
Location: LA, Cali
Posts: 2,816
Received 369 Likes on 337 Posts
Loll. Oh yeah.

I got drilled and slotted rotors for pretty cheap. I think it was like $140 for the whole set with ceramic pads. U can upgrade to better pads for a few bucks more. Made and shipped from Canada. Company is called MaxBrakes.
 
  #6  
Old 05-27-2019, 12:59 AM
poolshark's Avatar
Registered User
Join Date: Aug 2003
Posts: 266
Received 2 Likes on 2 Posts
While I don't have slotted rotors, I've had success with the Centric brand rotors on Tire Rack. I recall cross-drilled and slotted varieties available at Tire Rack too.
 
  #7  
Old 05-27-2019, 02:36 AM
Urbanengineer's Avatar
Super Moderator

iTrader: (3)
Join Date: Jun 2013
Location: OH-IO
Posts: 11,061
Received 1,016 Likes on 935 Posts
Blanks, great!

Slotted, Hell yeah!

Cross drilled, !

I'll never buy cross drilled again after they cracked on my Tennessee trip.
 
  #8  
Old 05-27-2019, 09:37 AM
Mr.GEE's Avatar
Registered User
Join Date: Feb 2005
Location: Severn, Maryland
Posts: 420
Received 31 Likes on 30 Posts
I purchased the slotted and dimpled for my Brembo equipped 2004 several years ago along with the pads. Minimal dust and adequate stopping power. You have to burnish the new pads & rotors when installed. Below is the link to the supplier I purchased them from.
https://brakeperformance.com/
 
  #9  
Old 05-27-2019, 09:29 PM
Blue Dream's Avatar
I drove ttrank's car solo

iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,301
Received 1,486 Likes on 1,221 Posts
G35 sedan w/ too much money in mods
Moved to the appropriate place......

My favorite place to buy rotors is r1concepts. Visit the website to pick out rotors and/or pads then head over to their ebay store. For some reason the exact same products are cheaper on ebay. They use centric blanks for their rotors and their proprietary pads are really good as well. I paid $174 for 4 rotors and 4 sets of pads for the GTO which included shipping. I've used r1 products for more than 10 years and have never been disappointed. They also have a loyal following from a lot of members here as well.
 
  #10  
Old 05-28-2019, 02:25 PM
cleric670's Avatar
BANNED!!!

Join Date: May 2017
Location: Washington State
Posts: 14,790
Received 2,456 Likes on 2,150 Posts
Coupe 6MT Premium RAS
Originally Posted by Blue Dream
Moved to the appropriate place......

My favorite place to buy rotors is r1concepts. Visit the website to pick out rotors and/or pads then head over to their ebay store. For some reason the exact same products are cheaper on ebay. They use centric blanks for their rotors and their proprietary pads are really good as well. I paid $174 for 4 rotors and 4 sets of pads for the GTO which included shipping. I've used r1 products for more than 10 years and have never been disappointed. They also have a loyal following from a lot of members here as well.
I have their cross-drilled + slotted rotors, they're almost worn out and they didn't crack around the drilled sections at all. They definitely have my loyalty.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Rehman2009
Brakes & Suspension
7
05-27-2019 12:10 PM
SA Z-ster
Archived Sales
9
09-03-2009 05:24 AM
Nappy
Brakes & Suspension
7
11-18-2007 08:06 PM
SleekStyle
Brakes & Suspension
1
02-11-2006 02:46 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: G35 rotors



All times are GMT -4. The time now is 06:09 PM.