how low can u go on tein basics?
#1
#2
Originally Posted by 808_G35
anyone have pics of tein basics cranked all the way down? i'm not saying i wanna do it but just wanted to know how much play it has..thanks
Just follow the link and look at the chart, their you'll see the min and max lowering amounts for all Tein coilovers.
http://www.tein.com/infiniti.html
#5
Here is a pic of Annual's car:
You can slam the fronts pretty good, but the rear won't go as low. It will probably look funny if you set both to lowest setting. I just got my Basics on this week, but my initial impression is they are softer than I thought they would be. I will warn you though, my taste leans toward performance over luxury. You feel the road more, but at the same time it recovers much quicker and is a vast improvement over the stock dampening.
You can slam the fronts pretty good, but the rear won't go as low. It will probably look funny if you set both to lowest setting. I just got my Basics on this week, but my initial impression is they are softer than I thought they would be. I will warn you though, my taste leans toward performance over luxury. You feel the road more, but at the same time it recovers much quicker and is a vast improvement over the stock dampening.
#6
#7
Trending Topics
#9
Originally Posted by papagz
ive got the tein basics and my front went down about 2 inches. i have the rear slammed to the bottom. front was a bit lower then the midway point. i love them and they are much better than stock very minimal body roll and smooth for coilovers. for the price they rock. selling mine btw
#12
#13
Noob question I know but I just swapped these off a 350z and haven't got any instructions or anything on the method of how to lower the front. When I pulled them off the Z it sat and inch maybe and inch and a half off the ground. I'm sitting like three up?!? Where did I to wrong? Does the G sedan just sit higher?
Thread
Thread Starter
Forum
Replies
Last Post
boostelevator
Engine - Power Adders
1
09-09-2015 05:56 PM