The springs have settled but there is a difference from the ground to the fender line of about a half inch both front and rear. I had these springs on my old sedan and did not have any issues. Does anyone have any ideas of what could be wrong? I have already advised my mechanic who also did the install on my sedan. Any thoughts are greatly appreciated. Thanks.

 

You need to clear your question up a bit. You took the teins off of your sedan and installed them on? After the install your car is 1/2" lower all around or the front is lower than the rear?

 

They are different heights in the front from side to side and the same in the rear. The only thing I can think of is that the springs are not seated correctly or the ground I am on is very uneven. I am going to try to find the most flat and level surface and measure again.

 

how long did it take for the springs to settle?