Canada Serving Canada.

Simone performance

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 06-13-2007, 05:21 PM
ninog35's Avatar
Registered User
Thread Starter
Join Date: May 2006
Location: brampton
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up Simone performance

Today I took the long drive to simone performance to get my h-techs installed.(pictures will be coming a bit later)...so i had the chance to meet and chat with Vic. All I can say is that Vic is a great guy. He made the long wait very entertaining with some witty jokes and whatnot. Steve was also a good guy as well. The car looks great now. Its not too low and it rides pretty good, so i would i like to thank you guys for recommending Vic.

Btw.. how long should i wait to get a alignment done?
 
Attached Thumbnails Simone performance-l1-copy.jpg   Simone performance-l2.jpg   Simone performance-l3.jpg  

Last edited by ninog35; 06-13-2007 at 09:12 PM. Reason: added pics
  #2  
Old 06-13-2007, 06:51 PM
XuperXero's Avatar
Registered User
Join Date: Jul 2006
Posts: 492
Likes: 0
Received 0 Likes on 0 Posts
I say at least a week for it to completely settle down.

I'm a regular at Simone's too, I dont trust anyone else to work on my car. They just installed my SS brake lines and Underbrace. I'll be heading up there tomorrow to install my SS clutch lines..
 
  #3  
Old 06-13-2007, 08:13 PM
Gordon's Avatar
Registered User
iTrader: (2)
Join Date: Jun 2005
Location: Toronto, ON
Posts: 220
Likes: 0
Received 0 Likes on 0 Posts
I'm also a regular at Simone's, Vic and Steve did all my suspension work and I will be heading up there this Saturday to get my Stillen swaybars installed.
 
  #4  
Old 06-13-2007, 08:56 PM
Lusid's Avatar
Registered User
Join Date: Jun 2007
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Thumbs up

Simone Peroformance has my recommendation too. Well, I haven't had any work done there yet... but just from talking to Vic I can tell he's a really good guy. Very knowledgable and helpful. He's definately going to be my go to guy for work. I don't know if I would have even discovered his shop without this forum... and I live in Aurora, he's like 5 minutes away!

I was there ordering some DBA rotors and Hawk pads today. I hope the combo works out for me.

Hmm... maybe a bit of an intro as this is my first post.

I have a 2003.5 6MT Sedan. Got it about 6 months ago. I'm not sure how crazy I'm gonna get with "modding" the car, but we'll see. Things may change.

I'm happy to be here, this is a really good forum.
 
  #5  
Old 06-13-2007, 08:58 PM
dober03's Avatar
Registered User
Join Date: Jun 2007
Posts: 3
Likes: 0
Received 0 Likes on 0 Posts
Totally agree with you.

WELCOME TO THE FORUM.
 
  #6  
Old 06-13-2007, 09:09 PM
InTgr8r's Avatar
Staff ALUMNI (retired)
iTrader: (23)
Join Date: Jan 2004
Location: Toronto, GTA north
Posts: 21,095
Received 47 Likes on 39 Posts
+1.. Vic is definitely a good guy & runs a great shop!
 
  #7  
Old 06-13-2007, 09:15 PM
ninog35's Avatar
Registered User
Thread Starter
Join Date: May 2006
Location: brampton
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Lusid
Simone Peroformance has my recommendation too. Well, I haven't had any work done there yet... but just from talking to Vic I can tell he's a really good guy. Very knowledgable and helpful. He's definately going to be my go to guy for work. I don't know if I would have even discovered his shop without this forum... and I live in Aurora, he's like 5 minutes away!

I was there ordering some DBA rotors and Hawk pads today. I hope the combo works out for me.

Hmm... maybe a bit of an intro as this is my first post.

I have a 2003.5 6MT Sedan. Got it about 6 months ago. I'm not sure how crazy I'm gonna get with "modding" the car, but we'll see. Things may change.

I'm happy to be here, this is a really good forum.
welcome to the club...I was there when he was talking to you today...I remember explaining the pads to you.


well i added some pics...tell me what you guys think
thanks
nigel
 
  #8  
Old 06-13-2007, 09:45 PM
godmans's Avatar
Registered User
iTrader: (22)
Join Date: May 2004
Posts: 2,239
Received 4 Likes on 3 Posts
Not sure if Vic mentioned me lol =) I referred quite a few guys to him.. and even i have to drive up some 100kms round trip just to have my car serviced by him.. it is well worth it
 
  #9  
Old 06-14-2007, 01:11 AM
RiCeBrNr's Avatar
Registered User
iTrader: (3)
Join Date: Oct 2006
Location: Markham, ON, Canada
Posts: 269
Likes: 0
Received 6 Likes on 2 Posts
Originally Posted by ninog35
welcome to the club...I was there when he was talking to you today...I remember explaining the pads to you.


well i added some pics...tell me what you guys think
thanks
nigel
Lookin really good!

As a fellow S-22 owner, it really fills in the fender very well.
 
  #10  
Old 06-14-2007, 06:57 AM
ninog35's Avatar
Registered User
Thread Starter
Join Date: May 2006
Location: brampton
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by RiCeBrNr
Lookin really good!

As a fellow S-22 owner, it really fills in the fender very well.
thanks man!
 
  #11  
Old 06-14-2007, 09:37 PM
Lusid's Avatar
Registered User
Join Date: Jun 2007
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ninog35
welcome to the club...I was there when he was talking to you today...I remember explaining the pads to you.


well i added some pics...tell me what you guys think
thanks
nigel
Hmm... I only remember talking to Vic. I think you were talking to someone else at a different time. I'm pretty sure I would have noticed your car and those rims.

Too bad, it would have been cool to meet someone randomly like that.

Maybe next time.
 
  #12  
Old 06-14-2007, 09:47 PM
ninog35's Avatar
Registered User
Thread Starter
Join Date: May 2006
Location: brampton
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
^^ it was probably someone else, and my wheels aren't that noticeable
 
  #13  
Old 06-14-2007, 09:50 PM
GreenGoblin's Avatar
The goblin resurrection

iTrader: (66)
Join Date: Oct 2006
Location: In my garage
Posts: 25,863
Received 187 Likes on 95 Posts
looks good it will settle some more in a week or so
 
  #14  
Old 06-15-2007, 02:45 PM
netcbc's Avatar
Registered User
iTrader: (2)
Join Date: Jan 2006
Location: GTA - Ontario Canada
Posts: 841
Likes: 0
Received 1 Like on 1 Post
still on stock struts/shock?? anyone know what springs can get away on stock struts/shocks and no camber?
 
  #15  
Old 06-15-2007, 04:00 PM
XuperXero's Avatar
Registered User
Join Date: Jul 2006
Posts: 492
Likes: 0
Received 0 Likes on 0 Posts
^Anything with a drop of 0.8 or less and spring rate similar to OEM or softer
 


You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: Simone performance



All times are GMT -4. The time now is 09:25 PM.