Gord's GroundingGear!
Joined: Nov 2003
Posts: 30,233
Likes: 175
From: Rothesay, New Brunswick, Canada
Originally Posted by GEE35X
That change sounds very dramatic Ron. Are you sure alot of the improvement did not occur just from resetting the ECU.
I have heard a lot good things about Gords grounding kit, but usually the improvements were more noticeable in automatics.
Wayne
I have heard a lot good things about Gords grounding kit, but usually the improvements were more noticeable in automatics.
Wayne
Originally Posted by Gobsidian
The ones that go around the back are just bolted to the Plenum bolts on either side. The ones that go into the battery box are 1 to the ground on the battery and the other goes through the main wiring harness grommet at the back corner and down to the ECU mounting bolt.
There is a grounding wire on the fronts of each of the strut towers as well.
Hope that helps!
- Ron
There is a grounding wire on the fronts of each of the strut towers as well.
Hope that helps!
- Ron
thanks
Originally Posted by GEE35X
That change sounds very dramatic Ron. Are you sure alot of the improvement did not occur just from resetting the ECU.
I have heard a lot good things about Gords grounding kit, but usually the improvements were more noticeable in automatics.
Wayne
I have heard a lot good things about Gords grounding kit, but usually the improvements were more noticeable in automatics.
Wayne
Actually I wanted to avoid the placebo effect and make sure what my butt was feeling was legit so to compensate for the ECU reset I did it before the install went for a few WOT runs without the wires installed.
Installed the wires and reset the ECU again.
- R
Actually come to think of it as well one of my stock grounding wires on the passenger side strut tower was corroded pretty badly as well. My car only has 24,000kms on it.
Originally Posted by 2SAVVY
Would someone be so kind to point me in the direction where I can go and buy these wires.. BTW do they come in BLUE??
This thread is a good place to start
https://g35driver.com/forums/showthr...=groundinggear
They come in Red, Blue and Root Beer colors I believe.
The guy you are looking for is GordGee.
- R
Registered User
Joined: Nov 2004
Posts: 94
Likes: 0
From: Brampton, Ontario
Thanks Gobsidian for the link. Just got all the details from GG on how to order so needless to say I will be doing that this week. Just not sure what colour to order yet. Torn between RED and the SMOKE.
Ken
Ken
Originally Posted by 2SAVVY
Thanks Gobsidian for the link. Just got all the details from GG on how to order so needless to say I will be doing that this week. Just not sure what colour to order yet. Torn between RED and the SMOKE.
Ken
Ken
Cool, post back with your experience Ken. I personally think the red looks pretty sharp in the engine bay!
Cheers,
- Ron
Originally Posted by 2SAVVY
Thanks Gobsidian for the link. Just got all the details from GG on how to order so needless to say I will be doing that this week. Just not sure what colour to order yet. Torn between RED and the SMOKE.
Ken
Ken
Originally Posted by Mmagic76
Just FYI when I was shopping for these, I've heard the Red and Blue would darken over time from the heat.
Will let you know how I make out with them, so far so good.
- R
Originally Posted by Gobsidian
Will let you know how I make out with them, so far so good.
- R
- R
Originally Posted by 2SAVVY
Went with your expert advice and ordered the RED. 
I'm sure you'll be happy with them. If you're going to bother with the wires may as well have a little bling.
Registered User
Joined: Nov 2004
Posts: 94
Likes: 0
From: Brampton, Ontario
I figured it matched the INJEN name plate which is red along with the Infiniti on the engine cover and you are correct a little bling isn't too bad..
Not looking forward the install but i'm sure it can't be too bad.. Luckily my neighbour has a lift in his garage so it should make it alot easier.. That reminds me gotta him a 12 pack..
Kinda forgot how bad the MOD bug gets when you get started.. I think I have dropped almost 4 G in 2 weeks.. Gonna have to wait on the exhaust.. Love the look of the HKS but the FI one is sweet too..
Not looking forward the install but i'm sure it can't be too bad.. Luckily my neighbour has a lift in his garage so it should make it alot easier.. That reminds me gotta him a 12 pack..
Kinda forgot how bad the MOD bug gets when you get started.. I think I have dropped almost 4 G in 2 weeks.. Gonna have to wait on the exhaust.. Love the look of the HKS but the FI one is sweet too..
Thread
Thread Starter
Forum
Replies
Last Post
Gordgee
Engine, Drivetrain & Forced-Induction
31
Jun 18, 2007 07:53 PM
