Annual GTA (PDR) dent clinic meet May 28th
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
Annual GTA (PDR) dent clinic meet NOW JUNE 4TH !!!!!
OK , so as usual I'll be hosting a dent clinic .
If you have dents and want them taken out this is a one time one, shot deal . Don't message me after asking for it or 1 more dent , it wont happen till next year . Otherwise the AVG cost is $135 for the first dent and 25-40 for each additional . Hail damage is not going to be covered . Basically 5 dents is the average of most cars. As you can see it adds up real fast when you have 3 alone.
This is $130 for your whole car .
It will be at Dixie road and Matheson (401 & Dixie , Mississauga )
It will start at 10am until about 5pm or when ever his arms give out.
It is scheduled in increments of 1 car per hour depending on the work needed , but we usually squeeze someone in .
Contact me to schedule a time for your car to be cured of careless people denting your baby.
The Info that must be provided to be scheduled is
Name , car year and make , how many dents , are any bigger than a quarter as those will be accessed on a case by case basis .
your email and phone number to contact you and what time you will be there.
There may be time to slip a few other cars in between but no guarantees. It is a first come first serve with a waiting list for others after . It fills every year and has a few flakes who don't show but everyone leaves happy .
Just an FYI for those who have not done it before .
PDR , paintless dent removal is a process of glues and steel rods to reshape the metal flat without damaging the panel or paint to completely flat.
There will be food and other refreshments and a good time for all , as well as seeing how it is done. Your more than welcome to hang out as it is a meet as well .
On a side note if anyone is interested in getting vinyl work such as a black or white roof i may have a guy there to do that as well . $160 with a sunroof , if you have a navigation antenna it will be more unless you can remove it . He uses 3M 2mm vinyl , so no cheap stuff. I might have my GS there as well to see it as it has the roof done as well.
As usual I have LED's for anyone interested also.
Here is the correct way of sending me the info ,
time :10am
Name: Billy Bob
year and model : 1952 *****'s jeep
How many dents and where on the car : hood/size of a rocket ,door/dime , trunk/quarter . fender/nickel
email :notagain@googlemail.com
mobile # :416-967-1111
BTW if it is not complete i will not reply and you will not get scheduled , the guys who really want this and know what a deal it is will make sure i have there number to call them to confirm , the rest are half half and waste appointment times for people who really wanted it .
As well don't schedule @ 3 if you have to be somewhere at 3:30 it is an approximate time , always come early but never late as you risk getting bumped.
If you have dents and want them taken out this is a one time one, shot deal . Don't message me after asking for it or 1 more dent , it wont happen till next year . Otherwise the AVG cost is $135 for the first dent and 25-40 for each additional . Hail damage is not going to be covered . Basically 5 dents is the average of most cars. As you can see it adds up real fast when you have 3 alone.
This is $130 for your whole car .
It will be at Dixie road and Matheson (401 & Dixie , Mississauga )
It will start at 10am until about 5pm or when ever his arms give out.
It is scheduled in increments of 1 car per hour depending on the work needed , but we usually squeeze someone in .
Contact me to schedule a time for your car to be cured of careless people denting your baby.
The Info that must be provided to be scheduled is
Name , car year and make , how many dents , are any bigger than a quarter as those will be accessed on a case by case basis .
your email and phone number to contact you and what time you will be there.
There may be time to slip a few other cars in between but no guarantees. It is a first come first serve with a waiting list for others after . It fills every year and has a few flakes who don't show but everyone leaves happy .
Just an FYI for those who have not done it before .
PDR , paintless dent removal is a process of glues and steel rods to reshape the metal flat without damaging the panel or paint to completely flat.
There will be food and other refreshments and a good time for all , as well as seeing how it is done. Your more than welcome to hang out as it is a meet as well .
On a side note if anyone is interested in getting vinyl work such as a black or white roof i may have a guy there to do that as well . $160 with a sunroof , if you have a navigation antenna it will be more unless you can remove it . He uses 3M 2mm vinyl , so no cheap stuff. I might have my GS there as well to see it as it has the roof done as well.
As usual I have LED's for anyone interested also.
Here is the correct way of sending me the info ,
time :10am
Name: Billy Bob
year and model : 1952 *****'s jeep
How many dents and where on the car : hood/size of a rocket ,door/dime , trunk/quarter . fender/nickel
email :notagain@googlemail.com
mobile # :416-967-1111
BTW if it is not complete i will not reply and you will not get scheduled , the guys who really want this and know what a deal it is will make sure i have there number to call them to confirm , the rest are half half and waste appointment times for people who really wanted it .
As well don't schedule @ 3 if you have to be somewhere at 3:30 it is an approximate time , always come early but never late as you risk getting bumped.
Last edited by SKperformance; May 25, 2011 at 12:57 AM.
Is the vinyl guy only doing roofs? I wanted my rear bumper done just above the tailpipes is on an 08' G sedan, thing is I won't let him cut the vinyl on the car he'll have to trace a template then put it on.
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
the vinyl around the bumpers valance has to be done on the car as it is proper vinyl which is heated and shrinks into place and cures.
He did my valance on my GS as well in the same spot , he basically does 1 inch increments , cuts it then presses it down and heats it to seal it on the bumper.
He does door creases , depending on the size and severity it may be able to be included in the price .
He does carbon vinyl but the pricing is alot more.
Here is the correct way of sending me the info ,
time :10am
Name: Billy Bob
year and model : 1952 *****'s jeep
How many dents and where on the car : hood/size of a rocket ,door/dime , trunk/quarter . fender/nickel
email :notagain@googlemail.com
mobile # :416-967-1111
BTW if it is not complete i will not reply and you will not get scheduled , the guys who really want this and know what a deal it is will make sure i have there number to call them to confirm , the rest are half half and waste appointment times for people who really wanted it .
As well don't schedule @ 3 if you have to be somewhere at 3:30 it is an approximate time , always come early but never late as you risk getting bumped.
He did my valance on my GS as well in the same spot , he basically does 1 inch increments , cuts it then presses it down and heats it to seal it on the bumper.
He does door creases , depending on the size and severity it may be able to be included in the price .
He does carbon vinyl but the pricing is alot more.
Here is the correct way of sending me the info ,
time :10am
Name: Billy Bob
year and model : 1952 *****'s jeep
How many dents and where on the car : hood/size of a rocket ,door/dime , trunk/quarter . fender/nickel
email :notagain@googlemail.com
mobile # :416-967-1111
BTW if it is not complete i will not reply and you will not get scheduled , the guys who really want this and know what a deal it is will make sure i have there number to call them to confirm , the rest are half half and waste appointment times for people who really wanted it .
As well don't schedule @ 3 if you have to be somewhere at 3:30 it is an approximate time , always come early but never late as you risk getting bumped.
How much more is that? interested as well
Trending Topics
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
not sure on the carbon pricing but the normal industry pricing is double normal vinyl costs.
Sorry for not updating the dent clinic list as i am just trying to hammer out a few last minute details . will confirm by email to all as updating this thread once everything is in place .
thanks
Sorry for not updating the dent clinic list as i am just trying to hammer out a few last minute details . will confirm by email to all as updating this thread once everything is in place .
thanks
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
OK , sorry for not responding faster , but there is a scheduling issue and I will have to move the date from May 28th to June 4th .
It will be the same times 10 -5pm .
I will try and contact all of those who sent me info earlier to see if they are still interested in that date as well.
Sorry again .
It will be the same times 10 -5pm .
I will try and contact all of those who sent me info earlier to see if they are still interested in that date as well.
Sorry again .
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
Ok here is the updated list with all previously confirmed from the previous date.
If there is a problem with the date for you please let me know so i can either reschedule you or let someone else have the appointment time .
There is a few more spots but it will be tight .
Remember this is a meet so come on out and see how its done and hang out as there will be food and drinks as well. People for the meet usually show up at 1-4.
It is going to be a few doors down from tires 23 in Mississauga on Matheson west of Dixie rd.
Take 401 to Dixie then go south ,
Make a right at Matheson and the 2nd driveway is where we will be just drive straight to the back of the stores and your there.
Its right behind stage west.
1380 Matheson Blvd unit 5
Mississauga , Ontario
L4W 4P8
thanks
10:00 Richard K 03 G35 Coupe
10:30 Faraaz D 04 IS 300
11:00 Adnan H 2005 C55
11:30 SV 2006 Lexus IS250 *pending*
12:00 Ray L 02 IS300
12:30
1:00 Steven S 94 Toyota Soarer
1:30 Dean M IS300
2:00 Ryan N 03 350z
2:30 Tanjit S 03 350z silver
3:00 Greg P 03 350z
3:30 Tanjit S 03 350z silver
4:00 Waqas S 08 Highlander
If there is a problem with the date for you please let me know so i can either reschedule you or let someone else have the appointment time .
There is a few more spots but it will be tight .
Remember this is a meet so come on out and see how its done and hang out as there will be food and drinks as well. People for the meet usually show up at 1-4.
It is going to be a few doors down from tires 23 in Mississauga on Matheson west of Dixie rd.
Take 401 to Dixie then go south ,
Make a right at Matheson and the 2nd driveway is where we will be just drive straight to the back of the stores and your there.
Its right behind stage west.
1380 Matheson Blvd unit 5
Mississauga , Ontario
L4W 4P8
thanks
10:00 Richard K 03 G35 Coupe
10:30 Faraaz D 04 IS 300
11:00 Adnan H 2005 C55
11:30 SV 2006 Lexus IS250 *pending*
12:00 Ray L 02 IS300
12:30
1:00 Steven S 94 Toyota Soarer
1:30 Dean M IS300
2:00 Ryan N 03 350z
2:30 Tanjit S 03 350z silver
3:00 Greg P 03 350z
3:30 Tanjit S 03 350z silver
4:00 Waqas S 08 Highlander
Thread Starter
|
Registered User
Joined: Oct 2004
Posts: 345
Likes: 0
From: Mississauga,Ontario,Canada
Alright , today is the day.
I have 2 possible appointments and the first is for 10 am sharp .
If anyone is interested come by for 10 , otherwise through out the day i may have some more time as he goes through the cars .
The meet hang out is for 2pm so drop by , have some food and a drink and see how its done or get a quote to do it another day if you have large dents .
It is behind ( not in )tires23 on Matheson blvd in Mississauga , corner of Dixie and Matheson.
1380 Matheson Blvd. E. Unit 5
Mississauga, Ontario
L4W 4P8
Try to arrive 20 minutes before your appointment to make things go smoothly .Otherwise you get bumped if your late .
Also have the cars basically clean as it makes it easier to evaluate and remove them . Also we can see if you have anymore we can clean up if possible for you .
I have 2 possible appointments and the first is for 10 am sharp .
If anyone is interested come by for 10 , otherwise through out the day i may have some more time as he goes through the cars .
The meet hang out is for 2pm so drop by , have some food and a drink and see how its done or get a quote to do it another day if you have large dents .
It is behind ( not in )tires23 on Matheson blvd in Mississauga , corner of Dixie and Matheson.
1380 Matheson Blvd. E. Unit 5
Mississauga, Ontario
L4W 4P8
Try to arrive 20 minutes before your appointment to make things go smoothly .Otherwise you get bumped if your late .
Also have the cars basically clean as it makes it easier to evaluate and remove them . Also we can see if you have anymore we can clean up if possible for you .
I hope you are doing another clinic early this year. Someone at the Walter Gretzky hockey tournament in Brantford gave me a nice little dent under my drivers door mirror last weekend.
Just in case you're not doing another clinic, would you recommend someone good, in the Kitchener area, that does PDR. I would really rather not have to look at this minor flaw until May or June.
Cheers
Just in case you're not doing another clinic, would you recommend someone good, in the Kitchener area, that does PDR. I would really rather not have to look at this minor flaw until May or June.
Cheers