wil the armorall vinyl protectant spray work, or you guys recommend something else, especially for the titanium console and the titanium door handles inside, i dont want to use something too harsh, basically i want to protect the dash and door panels, and the titanium part inside... i hope that titanium isnt prone to chip over time...

 

I'm almost afriad to answer this post, because I know you are going to 10 new questions after this...but here goes:

You don't want to use armor all because it is silicon based. Most people recommend something like 303 Areospace Protectant and Cleaner becasue they are water based.

The dash bits are prone to scratching, as discussed before, and some people recommned a little bit of CG on the titanium bits.

 

sorry for so many questions... but thanks fluff for the reply, CG quick you mean for the titanium part right? can i get this 303 aero cleaner from like walmart or pepboys/autozone?

 

yeah, CG-quick for the titanium, and yes 303 should be available from there

<font color=green>-Rambo</font color=green>
G35c 6MT DG/Willow/HyperGround/BorlaExhaust