IP and FPII will be needed and possibly some PG for some stubborn spots. Its good to have an array of products and pads because each application will require a slightly different set of combinations

 

bump

 

http://www.bettercarcare.com/how-to-...-polisher.html

 

That kit'll do it. IP will take care of those swirls.

 

Thanks Picus; I was waiting for you.

Thanks a lot to everyone else for your help. Now its time to make my purchase.

 

Will this kit work with my stock PC backing plate or do I need to buy the 6" hook and loop backing plate? Also does hook and loop mean they are not velcro?

 

Thought those close ups were my TB.....lol I have the same exact thing on mine. I also picked up a Meguiars version of the PC ( lifetime warrantee no questions asked ) awhile ago and also didn't use it for over a year and at that only twice. Their products did the trick to what you have there. Fortunately I have one of the best detailing places on the east coast close to me and after the winter my G will go in to get rid of all that stuff.

 

lol...

Theres a dumb reason why I haven't used mine yet. I wanted to post these pictures to make sure the kit I wanted had everything I needed. So I would wash my car and then I would forget to take pictures. Then a few days would go by and my car would get dirty so I couldn't take pictures...so blah blah blah, now I finally got the pictures and the minute someone answers my questions about the backing plate I will buy everything.

 

I just bought the kit and backing plate from properautocare.com for $90. I got a coupon code and saved $14 on shipping!!! (FREESHIP).

 

Hook & Loop = velcro. It's a fancy way of saying it. A 5" BP will work, but a 6" will be a little better with those pads.

 

if i was to do your car, i would tape one of the panels and do a side by side
comparo using my griots polish3. if that doesnt work do #2, #1.

those swirls are pretty nasty but pretty easy to get out using a random orbital.