Care & Detailing Washing, waxing, cleaning, caring.

Chamois vs. Microfiber Towels

Old Mar 12, 2008 | 03:32 PM
  #1  
lmulion03's Avatar
Thread Starter
|
Registered User
Joined: Mar 2008
Posts: 110
Likes: 0
Chamois vs. Microfiber Towels

Howdy doodie,

So, I've been researching and a lot of people recommend using MF towels. I currently have a genuine leather chamois towel. I was wondering what everyone preferred? Is it okay to use the chamois towel or should I use microfiber towels? I know the chamois can scratch the car if it traps particles that do so, but other than that they do not scratch. Do the MF's trap particles as well or not? I've been going back and forth on this topic. Let me know!
 
Reply
Old Mar 12, 2008 | 03:45 PM
  #2  
GR8TG35's Avatar
Registered User
iTrader: (1)
Joined: Dec 2003
Posts: 3,050
Likes: 12
From: western New Jersey
Any drying product can swirl/scratch the paints surface if not used properly.

I've used both, in the past, I used a chamois exclusively. I never found it to marr the finish.
But being that Infiniti's paint is so soft......I no longer use it. I found that when I wash my car, The final rinse is done with the hose nozzle off. I just let the stream of water flood the surface of the car. The water will "sheet' off your car,(If your car is properly waxed, there will only be a small amount of residual water left.)
This helps in removing as much rinse water as possible. Then I lightly use a 100% Cotton bath towel to absorb any remaining water spots.

Microfiber is a wonderful product, They trap the dirt particles, and pull them away from the paints surface, but it to can marr your surface if you use it to wipe the car with any residual dirt left on.
 

Last edited by GR8TG35; Mar 12, 2008 at 03:54 PM.
Reply
Old Mar 12, 2008 | 04:14 PM
  #3  
Scrooge's Avatar
Registered User
iTrader: (3)
Joined: Aug 2007
Posts: 1,265
Likes: 0
From: Palmdale Ca
Just like gr8tg35 said. Microfiber trap the dirt into there fibers. Also remember not to use pressure on the Mf towel so it push the dirt onto the finish. Just let it glide over you paint. Thats what I do.
 
Reply
Old Mar 12, 2008 | 04:42 PM
  #4  
ckg35's Avatar
Registered User
iTrader: (1)
Joined: Aug 2002
Posts: 493
Likes: 1
Originally Posted by Scrooge
Just like gr8tg35 said. Microfiber trap the dirt into there fibers. Also remember not to use pressure on the Mf towel so it push the dirt onto the finish. Just let it glide over you paint. Thats what I do.
+1 This applies to chamois as well.

I personally like using a leaf blower and lightly dragging an "Absorber". I rarely use my chamois anymore.
 
Reply
Old Mar 12, 2008 | 04:57 PM
  #5  
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
I use waffleweave MF's and plush MF's for drying exclusively now along with a flooding rinse and leafblower. I've been through natural chamois, synthetic absorbers, cotton towels, and finally settled on MF's. There is a reason why they have taken over the detailing community, especially WW types for drying. They simply just work, and have less potential to marr than any of the other products out there
 
Reply
Old Mar 17, 2008 | 12:22 AM
  #6  
Jay.Diem's Avatar
Registered User
iTrader: (57)
Joined: Mar 2008
Posts: 205
Likes: 0
From: TX
Originally Posted by redlude97
I use waffleweave MF's and plush MF's for drying exclusively now along with a flooding rinse and leafblower. I've been through natural chamois, synthetic absorbers, cotton towels, and finally settled on MF's. There is a reason why they have taken over the detailing community, especially WW types for drying. They simply just work, and have less potential to marr than any of the other products out there
any special technique for the WW MF?

I've been pretty happy with my absorber, but if this will be even more gentle on the drying process, then I will give it a try.
 
Reply
Old Mar 17, 2008 | 12:39 AM
  #7  
Joaquin03's Avatar
Staff ALUMNI
Staff Alumni
iTrader: (14)
Joined: Dec 2006
Posts: 3,635
Likes: 2
From: Texas/Afghanistan
Glad I saw this thread. I was about to pose the same type of question. Redlude, what method do you use to clean your MF's? I know you use Woolite, so I went out and bought some, but what is the dilution ratio? I used 1 part Woolite and 4 parts water and hand washed them. Max # of times you'll re-wash a MF before you downgrade it to other sections of the car (wheels, etc.)?
 
Reply
Old Mar 17, 2008 | 05:27 AM
  #8  
redlude97's Avatar
Registered User
iTrader: (25)
Joined: Feb 2006
Posts: 1,911
Likes: 8
From: Seattle, WA
I wash with woolite in my normal machine washer. I use way too many MF's to hand wash them. My usual wash procedure is to wash first with woolite using a normal amount for your wash load size under a heavy staining cycle with no fabrice softener, then I run it through another medium cycle with no detergent and 2-3 cups of distilled vinegar. Then I dry on a delicate cycle in my dryer after thoroughly cleaning the lint trap and wiping down the interior of the dryer. The vinegar works really well at releasing any residual detergent and leaves the towels very soft. I haven't had to downgrade any of my quality detailing towels yet but most only have 10-15 uses on them. My collection is always expanding too so I've never worn out a MF
 
Reply
Old Mar 19, 2008 | 08:02 PM
  #9  
Stealthcords's Avatar
Former G35driver Vendor
iTrader: (13)
Joined: Jan 2008
Posts: 96
Likes: 0
From: California
+1 on the waffle towels. I purchase mine from www.adamspolishes.com. I was raised on using chamious so I was VERY leary. But, after using it it once I was hooked.

I can do my whole car with two of them (without wringing them out). I also use a little detail spray.
 
Reply
Old Mar 20, 2008 | 02:35 AM
  #10  
immasexyboy's Avatar
Registered User
iTrader: (1)
Joined: Mar 2008
Posts: 95
Likes: 0
dont ever used chamoisssssss
 
Reply
Old Mar 20, 2008 | 02:37 AM
  #11  
immasexyboy's Avatar
Registered User
iTrader: (1)
Joined: Mar 2008
Posts: 95
Likes: 0
swirl marksss just use microfiber
 
Reply
Old Mar 21, 2008 | 11:49 PM
  #12  
hg35x's Avatar
Registered User
Joined: Mar 2008
Posts: 147
Likes: 0
From: Minnesota
The Zaino website has a section on what to use. They tested MF towels and found some scratched the crap out of the paint. At this point they still recommend U.S. made cotten towels, edges cut off, without fabric softener (of course).
 
Reply
Old Mar 23, 2008 | 08:52 AM
  #13  
kenchan's Avatar
Registered User
Joined: Aug 2004
Posts: 4,288
Likes: 3
you have to get the right MF towels. some are only good for applying
dressing on plastics, leather seats, etc.

for drying i use waffleweave towels from detailer's paradise and blot dry
my hobby cars. the dd's get Prima Hydro app during drying.

i use the Platinum MF towels for polish/wax removal, and QD. i tested
these under 500w halogen to see if it would haze the paint if i scrubbed
gently. no issue.


www.detailersparadise.com
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RemmyZero
V36 DIY
10
Apr 23, 2018 11:13 AM
Detailed Image
Care & Detailing
2
Sep 17, 2015 07:38 AM
Jiggerjuice
Brakes & Suspension
1
Aug 31, 2015 11:49 AM
Detailed Image
Care & Detailing
0
Aug 3, 2015 02:51 PM
Detailed Image
Care & Detailing
0
Jul 21, 2015 08:50 AM


Thread Tools
Search this Thread
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 08:10 PM.