What does the back of yours look like and how did you glue it on? The back of mine is just a flat square. When take off the stock pedal, there isn't a square on the other side. So how does it glue on?

 

i wouldn't try to glue it....if you drill out the center of the pedal it will line up with the hole in the brake arm, then you can just put a flat head screw/nut through it.

03 6MT coupe, red/willow, premium, aero, splash guards, alum pedals, clear corners, double 15% tint

 

i kept the oem rubber pad on, used automotive grade silicone, and slapped the aftermarket one on that. the new one will not come off without taking the oem one off. so it's safe to say that it's pretty secure.

 

I used a standard screw and nut to install the e-brake pedal.

------------------------
Borla exhaust, Nismo sway bar, Z duct, JWT p/c, Kinetix cats [img]/w3timages/icons/laugh.gif[/img]

238891-alumped.jpg

 

yep

simple nut-n-bolt job!





240824-GYMPKG5.jpg

 

is that your car? the dash is totally different.

 

I believe that's an FX dash.

------------------------
Borla exhaust, Nismo sway bar, Z duct, JWT p/c, Kinetix cats [img]/w3timages/icons/laugh.gif[/img]