Question on grounding wire for 5AT!
Joined: Aug 2006
Posts: 209
Likes: 0
From: Gainesville, FL
Question on grounding wire for 5AT!
I have installed all the Gordgee's grounding wires except ECU and TCU.
I have no idea how to get to the ECU from the Battery area.
There's no way to get ECU wire to the cabin area at all.
My wire keep goes to the Airfilter box, but no space to get to the ECU.
Help guys!
I have no idea how to get to the ECU from the Battery area.
There's no way to get ECU wire to the cabin area at all.
My wire keep goes to the Airfilter box, but no space to get to the ECU.
Help guys!
Cut a hole through the rubber grommet behind the battery. See this post and you tell there is a wire that goes past the battery:
https://g35driver.com/forums/showpos...&postcount=221
Just cut a bigger hole and feed the wire through. Then i suggest using high temp liquid electrical tape to seal back the hole to prevent any possible water getting into the cabin area.
https://g35driver.com/forums/showpos...&postcount=221
Just cut a bigger hole and feed the wire through. Then i suggest using high temp liquid electrical tape to seal back the hole to prevent any possible water getting into the cabin area.
Thread
Thread Starter
Forum
Replies
Last Post