I recently had nismo SS clutch line installed but today i nooticed there is a click noise when I press into the clutch (disengage) and I can lightly feel it on my foot. I did this couple more times while the car is parked & shut off I can hear it from outside. I "personally" don't think it's the clutch line issue as it doesn't really sound like it...

Any idea what is wrong?

 

That was the same problem I had. But my problem happened after I gave it a hard launch a couple of nights before and the clutch got stuck for a bit. My car is completely stock so I brought it to the dealer. They replaced the pressure plate under warranty. After they serviced it, the clutch feel was apparently lighter also. No noises since then. The trannys on our cars really suck. Good luck solving it.

 

Thanks for the info. I'll call up my local dealer and have them check it out.

 

https://g35driver.com/forums/drivetrain/161770-click-pedal-when-releasing-clutch.html

 

Mine sounds the same thing, except mine occurs when I step into the clutch and not releasing the clutch. Also, when the click occurs I can hear it from the outside as well and I could lightly feel the click on my foot.

I'll take a look this weekend.

 

yes it only happens when you step into it.

 

I noticed it occurs easily at a hot weather (hence CA is hot as heck lately). Taking it into dealer to take a look on monday.

 

After some fight with George @ Tustin Infiniti said they're going to try and replace the clutch pedal assembly...
Not sure if it's pressure plate or clutch assembly.. but if I have issue I'm bringing back to them.....

 

So I had my pedal assy replaced but click still exist....
I noticed it does it almost every time if I moved the clutch a bit towards brake and step it in... anyone know why it does that?

 

I need someone's input on this.
Dealer replaced my pedal assembly but it's still doing the same thing. They offered me to talk to the shop foreman personally to discuss this issue to make attempt to satisfy me (clearly I'm not satisfy right now). Can anyone give me an input as to what could be the issue?
pressure plate perhaps?