Does Nismo make the "strong" clutch fork pivot for G35/G35 yet?
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 237
Likes: 1
From: ga
Does Nismo make the "strong" clutch fork pivot for G35/G35 yet?
I think I broke mine at the trackday this weekend.
My clutch pedal went to the floor, we jacked up the car to inspect, the clutch fork is out of alignment, we can pull it in and out pretty easily.
The car idles just fine, I can go into gears etc. I'm almost 90% sure it is the pivot, I just have to drop the tranny and see.
I did some research, I've seen many of G35/g35 folks broke this item before. I came from the 240sx community, Nismo already made a "beef up" version of clutch fork pivot for S13/S14, Z32, and R32, R33 skyline; but I don't see any of them for VQ 6 speed transmission. Can some one point me to the right direction? Thanks
My clutch pedal went to the floor, we jacked up the car to inspect, the clutch fork is out of alignment, we can pull it in and out pretty easily.
The car idles just fine, I can go into gears etc. I'm almost 90% sure it is the pivot, I just have to drop the tranny and see.
I did some research, I've seen many of G35/g35 folks broke this item before. I came from the 240sx community, Nismo already made a "beef up" version of clutch fork pivot for S13/S14, Z32, and R32, R33 skyline; but I don't see any of them for VQ 6 speed transmission. Can some one point me to the right direction? Thanks
Thread Starter
|
Registered User
Joined: Feb 2008
Posts: 237
Likes: 1
From: ga
I need to drop the transmission for this mod? I have 55k on my car and I just upgraded to an exedy stage 2 clutch with an SS clutch line. I didn't upgrade anything because I was unaware of this and the pilot bearing instead of the pilot bushing. I haven't hooked my drive shaft back up, should I wait and do this mod?
Thread
Thread Starter
Forum
Replies
Last Post
poktanG35
Engine - Exhaust
23
Oct 26, 2015 03:32 AM
yoyoyo8
Exterior - Body Parts
1
Aug 12, 2015 03:04 AM
