I just installed the transgo valve body upgrade / shift kit yesterday ..

made a good long DIY with plenty of pictures over on the 350z forum


tried to post it over here .. but it wouldn't let me (my zero post count)


so here is the link .. mods, if you want to post it over here thats fine with me .. sticky the link or maybe I could copy it now that I got a post .. IDK


Transgo Valve Body Upgrade DIY

 

you havet to have 10 posts before you can start a new thread...

just spend a few min on a few posts and then you can create your own here.

 

ok cool ..


post #2


guess when I get to ten I'll copy it over into the DIY section on this forum .. figured it would be a big help to anyone with a auto g35 or 350z (also same kit on the trucks I think)

 

you can make a thread about it in this section and ask a mod to move it to the DIY section

The DIY section is a mod/admin approved part of the forum

Very nice DIY just read it on the other forum

 

aight .. lemme copy it real quick ..

MODS - Look out for it and move it .. thanks in advance

 

DIY is now on this forum in the Drivetrain DIY section

 

sweet. Isn't the 07 Z with the HR motor though? I would think the transmission would be different than the 03-06 models?

 

yes 07/08 Z's are HR

the tranny is the same .. RE5R05A tranny .. slight differences in valve body's but all use the same transgo kit

 

ok. good to know. thanks for the write up. Its something I've been waiting a while to see cuz I'm a little sketched out to do this going in blind.

How long did it take you to do the whole thing?

 

took about 7 hours total .. that was taking my time, organizing all the bolts by the letters on the instructions whilst I took them off, etc

I could probably do it in 4 if I did it again and had a lift

 

very nice! That is a hard-core DIY! Congrats

 

I very much want to get under my car and do this mod...

 

I know what you mean about wanting a lift! Spent 5 hours wrenching on the G Sunday putting it back to stock and I realized I am not 20 anymore.

Good job on the DIY, I spent $300 to have it done and then got rid of the car..sigh.