Im trying to figure out which 3.5 VLSD i should be looking out for? Which VLSD will fit in my 06 AT sedan. Does it have to be a AT driveshaft. Just looking to switch them out. I know some sedan guys have done it, hopefully someone can point me on the right direction. Thanks guys for any help

 

Any of them will work...technically you want to look for one from a MT as the flange to connect to the drive shaft is 4 bolts. However the flanges can be changed out. Just search on the topic, plenty of info about it on here

 

Dam i did a search. I could'nt really find what i was looking for as far as info, but then agian i would still consider myself a noob, so i know its my fault. I believe I read one thing that said the AT flange is 3 bolts. So what your are saying is i could just switch out the flange on my existing driveshaft to the new one if i get a MT driveshaft. I hope my noobiness doesnt **** anyone off

 

Here's a good thread...

https://g35driver.com/forums/drivetr...tial-swap.html

read through there, check out the pics...i knew everything i needed to know after going through it