low rpms/stall like sound after mid pipe install
#1
Join Date: Jan 2006
Location: Orlando
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
low rpms/stall like sound after mid pipe install
alright last tuesday i installed a coupe middy on my sedan and i have noticed since the install that when i stop at a light or with the car on P it idles way too low, it even sounds like is gonna stall, it has the kind of sound like when it needs new plugs but i just replaced them yesterday, it drops down to around 550rpms-600, it only does the stall thing when im at a light or something, not when the car is running, could it be a leak from the middy?? thats what im thinking but i wanted to ask bc i know theres a lot of knowledgable posters, thanx in advance
#5
Wierd, I had sorta the same simptom when I installed my plenum spacer, ztube and K&N. It would idle way too low, and feel like it was about to stall. I followed the procedure for the "idle air volume reset" and it worked like a charm. Car consistantly went to 650 RPM at idle, even from a fast decelleration, or when revving it.
#6
Join Date: Jan 2006
Location: Orlando
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by elrooko
Wierd, I had sorta the same simptom when I installed my plenum spacer, ztube and K&N. It would idle way too low, and feel like it was about to stall. I followed the procedure for the "idle air volume reset" and it worked like a charm. Car consistantly went to 650 RPM at idle, even from a fast decelleration, or when revving it.
:edit: nevermind, i think this is it https://g35driver.com/forums/faq-diy/6538-ecu-resets.html
Last edited by driguez; 07-16-2006 at 03:36 PM.
Thread
Thread Starter
Forum
Replies
Last Post
poktanG35
Engine - Exhaust
23
10-26-2015 03:32 AM