what is the stock size fuel injector?
Joined: Oct 2002
Posts: 2,474
Likes: 11
From: Vero Beach, FL
what is the stock size fuel injector?
I have been looking and searching, but I can't find the answer.
Does anyone know. I couldn't even find the answer in the service manual.
Does anyone know. I couldn't even find the answer in the service manual.
380cc.
On another topic , after install of a B&M Trans cooler ATF was leaking at the return lines. I double clamped and will be monitoring as you suggested. Thanks. If I had went to an event today I may have dumped another tranny.
On another topic , after install of a B&M Trans cooler ATF was leaking at the return lines. I double clamped and will be monitoring as you suggested. Thanks. If I had went to an event today I may have dumped another tranny.
-
I read at 350Z.com that Z is 280 or 300cc dpends on years,
How come G is 380cc so much bigger than Z?
A prior thread someone daid it was 290cc:
https://g35driver.com/forums/showthr...light=injector
How come G is 380cc so much bigger than Z?
A prior thread someone daid it was 290cc:
https://g35driver.com/forums/showthr...light=injector
Last edited by ma_sha1; Jan 10, 2007 at 02:31 PM. Reason: -
Joined: Oct 2002
Posts: 2,474
Likes: 11
From: Vero Beach, FL
essentially, it is a 290 cc/min injector rated at a 3bar fuel pressure.
Our cars run at a 3.5bar fuel pressure setting.....which effectively changes these to about a 330 cc/min.
Injector flow rates are proportional and relative to the fuel pressure.
Our cars run at a 3.5bar fuel pressure setting.....which effectively changes these to about a 330 cc/min.
Injector flow rates are proportional and relative to the fuel pressure.
Thread
Thread Starter
Forum
Replies
Last Post
marsman328
Northern California
1
Aug 11, 2015 07:29 PM
