Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

can our cars beat a mach1????

Thread Tools
 
Search this Thread
 
Rate Thread
 
  #1  
Old 09-22-2006 | 11:59 PM
dannyboi2088's Avatar
Thread Starter
|
Registered User
iTrader: (4)
Joined: Jul 2005
Posts: 222
Likes: 0
From: Houston, TX
can our cars beat a mach1????

ok well this guy wants to race me and hes been talkin soo much $HIT and ive been letting it go by me.....well finally i said why not lets run i have intake,exhaust,headers,and droped

so question is will he still walk me??? i know there fast and reason why i didnt wanted to run him because i thought he could just beat me easily but he is stock

ohh yea sorry i didnt know where to put this thread
 
  #2  
Old 09-23-2006 | 12:02 AM
dTor's Avatar
Registered User
iTrader: (30)
Joined: Jun 2006
Posts: 1,359
Likes: 2
From: Atlanta, GA
I have no idea. But why spend all the money on your mods if you're not going to put them to good use?
 
  #3  
Old 09-23-2006 | 12:11 AM
dkhl's Avatar
Registered User
Joined: May 2005
Posts: 33
Likes: 0
AT? You will lose, maybe.

Mach 1 has 300 HP, 300 TQ I believe, and if he's completely stock then you might have a chance with a few bolt ons. If he's got anything, and I mean something as small as an intake, your screwed.
 
  #4  
Old 09-23-2006 | 01:20 AM
DaveB's Avatar
Registered User
iTrader: (9)
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Driver to driver, you're smoked, even with all your mods. Those cars are underrated (305hp) and make over 275whp stock. A decent driver in a Mach 1 should coax out a 13.5@104mph. Good drivers pull 13.3s or so.
 
  #5  
Old 09-23-2006 | 03:38 AM
Fassster10's Avatar
Registered User
Joined: Apr 2006
Posts: 1,070
Likes: 0
From: Miami, Florida
MmMM well lets see i am stock and ive taken on a 2005 GT stock which is the same HP as the mach1, and let me say this, it will depend on the launch..i beaten two of them and got lost to another one by half a car...so good luck on the launch, you are not stock so you should do fine...
 
  #6  
Old 09-23-2006 | 03:52 AM
DaveB's Avatar
Registered User
iTrader: (9)
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Originally Posted by Fassster10
MmMM well lets see i am stock and ive taken on a 2005 GT stock which is the same HP as the mach1, and let me say this, it will depend on the launch..i beaten two of them and got lost to another one by half a car...so good luck on the launch, you are not stock so you should do fine...
Street racing proves nothing. The truth is revealed at the track. You beat the drivers, not the cars. I've beaten significantly faster cars at the strip only because the drivers weren't very good.
 
  #7  
Old 09-23-2006 | 04:01 PM
dTor's Avatar
Registered User
iTrader: (30)
Joined: Jun 2006
Posts: 1,359
Likes: 2
From: Atlanta, GA
Originally Posted by Fassster10
MmMM well lets see i am stock and ive taken on a 2005 GT stock which is the same HP as the mach1, and let me say this, it will depend on the launch..i beaten two of them and got lost to another one by half a car...so good luck on the launch, you are not stock so you should do fine...
So what? My G, stock, has 50 more HP than my '85 Corvette when it was stock, and the G is slower in the 1/4 mile than the Vette. You cannot make such a comparison between two different cars because they have the same rated HP.

Gearing and torque curve are just as important, if not moreso, than the peak HP of an engine.
 
  #8  
Old 09-25-2006 | 03:51 AM
EricIsKlumzyee's Avatar
Former G35driver Vendor
iTrader: (93)
Joined: Sep 2004
Posts: 9,524
Likes: 2
From: So. Cali - Rowland Hts
my 05 6MT beat a mach1 with a k&n cone
 
  #9  
Old 09-25-2006 | 05:42 AM
1stG35inCTRY's Avatar
Registered User
Joined: Mar 2006
Posts: 327
Likes: 0
From: Riga, Latvia
Originally Posted by dTor
So what? My G, stock, has 50 more HP than my '85 Corvette when it was stock, and the G is slower in the 1/4 mile than the Vette. You cannot make such a comparison between two different cars because they have the same rated HP.

Gearing and torque curve are just as important, if not moreso, than the peak HP of an engine.
EXACTLY and this is another example why JUST HP numbers (peak power) is more promo tool.... there are more things like torques weight/HP ratio, rwd/fwd/awd?, hp/torque curve etc...


I hope you got the point
 
  #10  
Old 09-25-2006 | 03:00 PM
griff87e's Avatar
Registered User
iTrader: (2)
Joined: Apr 2006
Posts: 250
Likes: 0
From: Oklahoma city, OK
Got beat by a mach 1 yesterday...but only by about a car length...mach 1's all have intakes, thats what makes them mach 1's, they also have the DOHC 4.6, like the cobra, not the stock gt
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Tolboothwilley™
Exterior-Vendor
6
07-28-2016 12:42 AM
marsman328
Northern California
1
08-11-2015 07:29 PM
newg37
G35 Coupe V35 2003 - 07
1
07-26-2015 09:32 AM
Karnicle
G35 Sedan V35 2003-06
1
07-23-2015 05:08 AM
Tony_Me22
G35 Sedan V35 2003-06
8
07-17-2015 06:30 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.

Quick Reply: can our cars beat a mach1????



All times are GMT -4. The time now is 12:24 PM.