Anyone seen this before?

I came across this unit in Super Street...

http://www.mines-wave.com/

http://www.mines-wave.com/english/pr...cing-shift.jpg

 

I have never seen this product before. It looks like only the Racing Shift Harness Kit is available for the G35:　　　　　　　　 　
http://www.mines-wave.com/english/pr...ing-shift.html

Gordgee has already posted a DIY to convert the AT shift to work as a “pull back, shift up” basically for free without the need for this harness kit:
https://g35driver.com/forums/engine-drivetrain-forced-induction-diy/122292-5at-shifter-direction-mod.html

Too bad it looks like the carbon fiber shift indicator only fits the 350Z. I would have seriously considered this mod if this shift indicator fit the G35.

 

In the article in Super Street, it was put in a 03.5 G35 Sedan...

 

Can you post more info, pics, or a link to this article? I'm interested in this as a potential mod for my coupe. I'd like to see how the carbon fiber shift indicator fit in the 03.5 sedan.

 

I saw that article....on the Mines website the shiftplate is only listed for the Z....but the harness is listed for both. So I guess it only works on the Z.

In the article, they never showed it in the G sedan....so not sure if they were just saying it was put in...or if it was actually put in. Looks hot though...its about $3-400 I think.

 

you can buy a plug n play for 50 bucks or just do what I did and do it yourself its 2 wires you have to switch!