Finished Engine Project :)
#1
Joined: Dec 2006
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
From: Berwyn, Pa
Finished Engine Project :)
Hey guys I just thought I would update everyone on what has been going on with me the past 6 or so months. Well I started building my own engine and YES I DID BUILD THE ENGINE MYSELF AND IT RUNS AWESOME!!! After the discussion on building a NA or Turbo engine I went with the Twins for the power and I am looking to make and the ease of doing it I went FI! Will get pics up in a few days!
Here are the mods:
.020 Overbore Block
Greddy TT Kit w/ FMIC
Upgraded Oil Feed Lines
HKS SSQV BOV (New Style)
Ported Heads w/ Ferrera +1mm Valve Train
JWT S1 Cams
Polished and Balanced Crankshaft
Mrev 2
5/16 Spacer
HKS Stopper Ring Head Gasket
Arias Extreme Duty Pistons ( 9:1 CR)
Pauter Forged Rods
CJ Motorsports Fuel Return System
RC 650CC Injectors
RCDCC Denso Connector Clips
Walbro 255LPH Fuel Pump
ARP L19 Head Studs
ARP Main Studs
Cosworth Race Bearings ( Rod and Main)
APS High Volume Oil Pan
Nissan Rear Coolant Bypass System
Nismo Thermostat
Cusco Oil Catch Can
B&M Transmission Cooler
Turbo XS UTEC (12 Pound Tune from Sam @ Forged!)
Apexi Boost Controller
Apexi Turbo Timer
Defi Amber Boost, Oil, Fuel Pressure Gauges
Test Pipes
HKS True Dual Exhaust
Body/Suspension:
Veil Side Front Lip
Zerosun Side Skirts
Greddy Rear Diffuser
Cusco Front Adj. A-Arms
Stillen Sway Bars
JIC FLTA2 Coilovers (sale pending)
Sevas S7 Gold 20" Rims
Toyo Proxes T1R
Future Mods: Next 3 months
Fully Built Transmission
Forged Half Shafts
Cosworth Intake Plenum
SGP R&D Wastegate Relocation Kit
SGP Fluidampr Harmonic Damper
HKS DLI Ignition
Upgraded Fuel Pump (Not Sure What One Yet)
Oil Cooler
Koyo Radiator
Strut Bars
Rear Camber Arms
And some other stuff I can’t think of lol
I need some opinions on who to get a Built Tranny from. Yes it is an Auto I blew out my left knee and while I can drive stick I can't do it for a long period of time so I went with an Auto, which there is nothing wrong with.
And how is the driveshaft’s on this car? They are two pieces so I am thinking they need an upgrade but I don't know for sure. Can someone please let me know and where to get it. Thanks!
Hope everyone likes what they heard!!
Chris
Here are the mods:
.020 Overbore Block
Greddy TT Kit w/ FMIC
Upgraded Oil Feed Lines
HKS SSQV BOV (New Style)
Ported Heads w/ Ferrera +1mm Valve Train
JWT S1 Cams
Polished and Balanced Crankshaft
Mrev 2
5/16 Spacer
HKS Stopper Ring Head Gasket
Arias Extreme Duty Pistons ( 9:1 CR)
Pauter Forged Rods
CJ Motorsports Fuel Return System
RC 650CC Injectors
RCDCC Denso Connector Clips
Walbro 255LPH Fuel Pump
ARP L19 Head Studs
ARP Main Studs
Cosworth Race Bearings ( Rod and Main)
APS High Volume Oil Pan
Nissan Rear Coolant Bypass System
Nismo Thermostat
Cusco Oil Catch Can
B&M Transmission Cooler
Turbo XS UTEC (12 Pound Tune from Sam @ Forged!)
Apexi Boost Controller
Apexi Turbo Timer
Defi Amber Boost, Oil, Fuel Pressure Gauges
Test Pipes
HKS True Dual Exhaust
Body/Suspension:
Veil Side Front Lip
Zerosun Side Skirts
Greddy Rear Diffuser
Cusco Front Adj. A-Arms
Stillen Sway Bars
JIC FLTA2 Coilovers (sale pending)
Sevas S7 Gold 20" Rims
Toyo Proxes T1R
Future Mods: Next 3 months
Fully Built Transmission
Forged Half Shafts
Cosworth Intake Plenum
SGP R&D Wastegate Relocation Kit
SGP Fluidampr Harmonic Damper
HKS DLI Ignition
Upgraded Fuel Pump (Not Sure What One Yet)
Oil Cooler
Koyo Radiator
Strut Bars
Rear Camber Arms
And some other stuff I can’t think of lol
I need some opinions on who to get a Built Tranny from. Yes it is an Auto I blew out my left knee and while I can drive stick I can't do it for a long period of time so I went with an Auto, which there is nothing wrong with.
And how is the driveshaft’s on this car? They are two pieces so I am thinking they need an upgrade but I don't know for sure. Can someone please let me know and where to get it. Thanks!
Hope everyone likes what they heard!!
Chris
#4
Joined: Dec 2006
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
From: Berwyn, Pa
#7
Joined: Dec 2006
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
From: Berwyn, Pa
Originally Posted by rockd
damn, this is gonna be a sick car... i'd love to see 1/4 mile vids when ur done! and props for doing it on a 5AT!
Originally Posted by martyg35
sounds like a sick setup bro. Keep up posted on it
Trending Topics
#9