Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

Engine stalls on 04 G35 6MT

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jan 12, 2008 | 04:39 AM
  #1  
whlion's Avatar
Thread Starter
|
Registered User
Joined: Jan 2008
Posts: 7
Likes: 0
Engine stalls on 04 G35 6MT

I just purchased a used 04 G35 coupe 6MT. After 20 mins that I drove off from the dealer's lot, when I was waiting at a traffic light, the engine shut off, and the "service engine soon" light came on. I couldn't restart the engine immediately. If I waited for a while, the engine could be started, but it would shut off 10 sec. My car was towed back to the dealer, and they diagnosed it which said the crankshaft position sensor malfunctioned. So they replaced the sensor for me.

I got the car back, but the same thing happened again, and the dealer towed car to a Nissan dealership to fix the problem. After a few days, the technician in Nissan said they replaced another crankshaft position sensor and found some loose wire connection so they also replaced the harness.

I got the car back today, and I drove it fine for 15 mins. Something similar happened again, when I accidentally released the clutch and stalled engine. Now what happens is that "VDC off", "Slip" and "Service engine soon" all 3 lights are on. After the engine stalled, it takes a few times to start up the engine again, and all 3 lights are still on, and it seems I still can drive the car. The dealer will take the car back to Nissan again.

I noticed that when the engine is idle, rpm is a little low. A couple of times when I start the engine and press the gas pedal, the engine doesn't rev up.

I am really pissed off by this car.
Does anyone know what the problem might be? Thanks for any help.
 
Reply
Old Jan 12, 2008 | 01:51 PM
  #2  
Klubbheads's Avatar
Registered User
iTrader: (10)
Joined: Oct 2003
Posts: 17,039
Likes: 14
From: LA, North Holly
to answer ur question very shortly is u got a used car and u don't know what the previous owner did to it. Ask the dealer to check if it has any mods.
 
Reply
Old Jan 12, 2008 | 03:18 PM
  #3  
2EFNFAST's Avatar
Registered User
Joined: Jan 2007
Posts: 155
Likes: 0
Sounds like there was a reason the other guy traded the car in....
 
Reply
Old Jan 12, 2008 | 11:12 PM
  #4  
DaveB's Avatar
Registered User
iTrader: (9)
Joined: Aug 2003
Posts: 6,573
Likes: 72
From: Kansas City
Has the throttle reset procedure and idle rpm procedures been done?
 
Reply
Old Jan 13, 2008 | 02:19 PM
  #5  
whlion's Avatar
Thread Starter
|
Registered User
Joined: Jan 2008
Posts: 7
Likes: 0
I don't think those procedures have been done.
 
Reply
Old Jan 13, 2008 | 02:26 PM
  #6  
whlion's Avatar
Thread Starter
|
Registered User
Joined: Jan 2008
Posts: 7
Likes: 0
I found someone had a very similiar problem with mine.

https://g35driver.com/forums/showthr...9372&posted=1#

Do you guys think it's becaused of the MAF or O2 sensor messed up?

Now the car dealer told me might be the problem with a sensor on the clutch, but I don't think those guys know much about the car. The car is back to Nissian again now.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
vmcarbuyer
Buying, Selling & Leasing Discussion
9
Oct 12, 2019 12:42 PM
netcbc
Exterior - Body Parts CDN
2
Aug 21, 2015 09:50 AM
NemesisGee
G35 Coupe V35 2003 - 07
41
Aug 11, 2015 07:10 PM
laksjd84
Exterior - Body Parts
1
Jul 24, 2015 05:12 PM
ClwMike
G35 Sedan V35 2003-06
7
Jul 23, 2015 12:55 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:05 PM.