i was just wondering what you guys used for the tube for the fitler on you procharger. i just bent my a/c lines and i didnt even have to take out the sc. it is real easy if you just take off the bumper. all i need to do now is drill the hole. any ideas or input is fine im open to anything. i got my dremel ready hahaha

 

i use a 3.5" 90 degree silicone tube.

 

Update us what you got going, if I did this my self it would be a mess, good luck buddy

 

first i cut the hole

then bent the a/c lines. if you look there is a bracket i cut towards the radiator

then used the rubber boot and stock intake that came with the kit

then drilled around the grill

added a filter

this is without a grill. i think it looks cool because the filter sits in the front. i do have my grill on though and i have no idea wht the pic is upside down lol

 

so i'm about to install an intake filter on my procharger this weekend... a quick qs: does it eliminate the need for the inline filter coming out of the FMIC?

 

nice set up!!

 

i dont know. my procharger was off a Z and didnt have the inline filter. i imagine you wouldnt need it anymore though

 

thanks man. it took me for ever to figure out how i wanted to do it. i had 3 diffrent ways in mind so i chose to go with the 1 no 1 has. now after doing it i see why people go the other ways about doing it lol

 

Well, here are the results... I didn't remove the in-line filter yet, but I will next time I take off the front bumper. As you can tell, I ended up cutting a lot of the black brace, which is useless anyways. Easier fitment that way and allows me to access the procharger blades if needed...

 

Nice! My filter was better! It's red! Haha GTM i beleive bought a K/N Intake and custom fabricated it so it looks badass, not that I have my Procharger anymore, but yeah Nice work Rockd!!!

 

hey rockd i dont know if u have 1 or not but if u dont u need an engine damper

 

why do u say that? and wouldn't it just cause the procharger to vibrate more?