Coolant controle valve for Motordyne - G35Driver - Infiniti G35 & G37 Forum Discussion

Feb 23, 2008 | 06:14 PM

GD-Up

Thread Starter

Registered User

iTrader: (3)

Joined: Sep 2007

Posts: 234

Likes: 0

From: Calgary, Alberta

Coolant controle valve for Motordyne

Hi all,
I just am in the middle of putting my 5"16 space in. I have the isothermal and copper TB upgrade, but is in necessary to put in a coolant control valve??
I live in Canada and it does snow here and gets damn cold so i got the copper TB, but its says the CCV is an optional install.
What are the benefits...is it really necessary??

THanks!!

Feb 23, 2008 | 06:17 PM

InTgr8r

Staff ALUMNI (retired)

iTrader: (23)

Joined: Jan 2004

Posts: 21,095

Likes: 47

From: Toronto, GTA north

I'm in Toronto & didn't have any problem without it.
With the Copper TB you're good to go!

Feb 23, 2008 | 06:27 PM

GD-Up

Thread Starter

Registered User

iTrader: (3)

Joined: Sep 2007

Posts: 234

Likes: 0

From: Calgary, Alberta

Awesome!!! Thanks so much for the info!

Feb 24, 2008 | 12:00 PM

QuadCam

Registered User

iTrader: (7)

Joined: Oct 2002

Posts: 2,474

Likes: 11

From: Vero Beach, FL

I bypassed the coolant through the TB all togehter. just take a length of hose and run it from the "heater" pipe on the drivers side of the engine and connect it to the "coolant pipe" on the back of the engine. you'll use the same nipples, but you are bypassing the throttle body from the coolant loop.