project 2k
#1
project 2k
hey guys ive been lurking around here for a while but i recently got a pretty large inheritance and decided to build a serious vq35 motor. i have a few questions though.
will a 106mm turbo be big enough to support the 2k hp target that i have set on the block? i have a stock block but it is sleeved and cryo treated also 3/4 filled. we've begun building on the motor, i wish i could post some pictures of it but my digi cam is broken and i've been too lazy to go and buy a new one, and we're stuck on choosing the right turbo for this application. fit or placing is not a problem as i've accounted for that. also i was wondering if the 1000cc injectors that i have are too large or not?
thanks for the help guys i'll take any criticism or suggestions with open ears. you guys know more than me and so far the only people who have been helping me is the shop im using to build this
will a 106mm turbo be big enough to support the 2k hp target that i have set on the block? i have a stock block but it is sleeved and cryo treated also 3/4 filled. we've begun building on the motor, i wish i could post some pictures of it but my digi cam is broken and i've been too lazy to go and buy a new one, and we're stuck on choosing the right turbo for this application. fit or placing is not a problem as i've accounted for that. also i was wondering if the 1000cc injectors that i have are too large or not?
thanks for the help guys i'll take any criticism or suggestions with open ears. you guys know more than me and so far the only people who have been helping me is the shop im using to build this
Last edited by postaprice; 02-24-2008 at 11:26 PM.
#3
Originally Posted by HomieG35
Not sure about the turbo size, I've seen a Supra run a 106 @ around 1300hp. The 1000cc injectors don't seem big enough though?
i was hoping to keep it single turbo, and a big one at that, would the motor be able to spool something like twin 95's? i dont know how much cfm each cylinder puts out but it may work?
#4
Originally Posted by postaprice
hey guys ive been lurking around here for a while but i recently got a pretty large inheritance and decided to build a serious vq35 motor. i have a few questions though.
will a 106mm turbo be big enough to support the 2k hp target that i have set on the block? i have a stock block but it is sleeved and cryo treated also 3/4 filled. we've begun building on the motor, i wish i could post some pictures of it but my digi cam is broken and i've been too lazy to go and buy a new one, and we're stuck on choosing the right turbo for this application. fit or placing is not a problem as i've accounted for that. also i was wondering if the 1000cc injectors that i have are too large or not?
thanks for the help guys i'll take any criticism or suggestions with open ears. you guys know more than me and so far the only people who have been helping me is the shop im using to build this
will a 106mm turbo be big enough to support the 2k hp target that i have set on the block? i have a stock block but it is sleeved and cryo treated also 3/4 filled. we've begun building on the motor, i wish i could post some pictures of it but my digi cam is broken and i've been too lazy to go and buy a new one, and we're stuck on choosing the right turbo for this application. fit or placing is not a problem as i've accounted for that. also i was wondering if the 1000cc injectors that i have are too large or not?
thanks for the help guys i'll take any criticism or suggestions with open ears. you guys know more than me and so far the only people who have been helping me is the shop im using to build this
#5
Thread
Thread Starter
Forum
Replies
Last Post
Extreme Dimensions
Southern California
3
10-19-2015 06:28 PM