cuz that code has nothing to do with MAF... thats what i hoped it would be since i have a spare one somewhere in my closet of parts, if its even still good... ill try gettin it fixed by sat...cuz we got the panhandle g/z meet in destin..1st meet ill be able to go to

 

anyone else got any ideas... i guy here in town said he works at nissan service and sometimes when they do a tb cleaning that they have to do a relearn for idle... anyone else heard this?

 

went to nissan and they tried the idle relearn bout 10 times. it works until u turn the car off and restart it... they told me i need a new throttle body acuator for $380...so now im on hunt for a used TB

 

Argggh! My p1122 and p1126 code popped up again today! What should I do! I don't want to bust a 2hr mission back to GTM for a service engine soon light Cleaning Maf, clean throttle bottle, I have no clue and idea what so ever on how to do that! Damn't! But then my car is not idling up high around 1100-1200 like the people with the codes though, my car idles around 775-800, i still bone out no problem, up to 7200rpm and shift no problems, runs ok, weiiiiiiiiiiird!

Also, anyone have a pic of where my maf sensor is, or even how to work with my throttle body haha, I'm super newb man, I just want to go fast, i paid and tell them what i want, and i get it, but comes down to DYI things, I'm screwed

 

^^Update, now my car stalls 2 out of 5 it will actually start when i try to start it, besides that it just shoots the rpm up and it falls backdown below 0 and stalls.

 

ive changed my tb and now getting code 2135 which was wrong voltage to my tps and then i cleared it and got a 0234( i think) which was basically same thing...i cleared it and have been ok now for 2 days.... i going ahead and buying yet a another tb to see if maybe i just got a bad one......

btw my car doesnt stall, it just wont go above 1500 rpm's until i turn the car off and restart it.... then it runs fine again but has a check engine light.....

weird, but im trying daily to get it figured out......im bout to just trade it in on an 06 coupe...

 

have you done the troubleshooting that the factory service manual says. checking the voltages at terminal 3 and 104 on the ECM?

get the service manual at www.350z-tech.com if you dont have it. The dealer follows this, so you can do the same things they are for free.

 

Hey did you guys ever figure what what was going on? I cleaned my throttle body, changed the gasket now my check engine light is going off every few miles. I torqued them down properly and did the re-learn procedures but it seems like when it shuts the car off, the settings go away because the RPMs jump? Anyone know what might be going on?