Hi All --

Is there a bar that could be installed across the engine on a G35 Coupe 6MT similar to those on the 350Zs? (without the need to remove the engine cover and the need to be leaving it off). There are two bolts on either side that seem to have been designed for this, but are not used.

Kaveh

 

https://g35driver.com/forums/suspension-vendor/163289-its-back-richie-front-strut-bar-v-2-group-buy.html

if you have a spacer, then the engine cover may have to be removed.

 

Nice!!! How much is that?

My engine is int he OEM condition, nothing done to it. I only have a Stillen Air Intake. Does this make the car feel different while driveing?

Thanks,
Kaveh.

 

Forgot to ask, is this easy enough to be installed by a non mechanic or is doing so recommended?

Kaveh

 

Follow the link posted by O Rly above to find the Richie bar thread. I think the cost is still $225 for the bar. It is a relatively easy install with detailed instructions but pretty self explanatory when you see the bar and mounts. Each mount bolts up directly to the top of the struts and uses the 10MM nuts to bolt down. This is an easy mod you can do yourself.