Injen Intake 6SP Coupe RD1992
#1
Injen Intake 6SP Coupe RD1992
Just bought this intake from a distributer on ebay, however it is missing one of the two vibra-mounts that it says it is supposed to come with in the parts list. I contacted the seller and he says only the RD1990 for the automatic needs 2 the 6 spd only needs one. Is this true, or is he flat out lying to me. Any help would be greatly appreciated.
Thanks in advance,
Bryan
Thanks in advance,
Bryan
#3
Re: Injen Intake 6SP Coupe RD1992
I have the Injen CAI on my 6mt and it came with the 2 rubber bushings. I've never heard of the 6mt only needing 1. If you'd like I can take pics of the install to show you the rubber bushings. Let me know.
04' G coupe/TB/Prem/Sport/Nav/35% Tint/Injen CAI/Clear corners/V5 Plenum/GroundingGear/Nismo caps
Plates: 1REVER1
04' G coupe/TB/Prem/Sport/Nav/35% Tint/Injen CAI/Clear corners/V5 Plenum/GroundingGear/Nismo caps
Plates: 1REVER1
#4
#6
#7
Trending Topics
#8
Re: Injen Intake 6SP Coupe RD1992
Thanks for all the help. I called Injen's technical support yesterday and there response was, if the part list say there should be two then you need two, inspirational at best. So for those in this post, in the instructions when it says to that the first step is to remove the stock m6 bolt and screw the vibra mount into the pre tapped hole in the frame, and then in step 5 it says to screw the vibra mount into the pre tapped hole to the side of the intake manifold, which step do you skip.
Thanks,
Bryan
Thanks,
Bryan
#9
Thread
Thread Starter
Forum
Replies
Last Post