I need some help installing the stillen valence grilles! Im thinking of a way but i hope theres an easier one.

 

You have two options....

1. Simply place them in front of the stock valence and use black cable ties to fasten them to the stock valence. ( this is what mostly everyone that I know of has done)

2. Remove the bumper, *CAREFULLY* cut the stock valence with a hacksaw, use a dremmel to *CAREFULLY* sand the rough edges of the now-open space, paint the sanded edges w/ flat black paint and then clip the Stillen valence grilles with the supplied clips.

You choose....

hope this helps...

doc

 

Sounds good, how do i go about removing the bumper =)

 

there's a DIY on how to remove the front bumper somewhere on this website. I think it might be in the DIy section...

doc

 

well i searched and searched and even looked on search engines... i cant find anything on removing the front bumper. =\

 

If you have a sedan it's easy, a bunch of bolts under the bumper and a few on top.

 

Here ya go....

https://g35driver.com/forums/showfla...&sb=5&part=all

doc

 

I cut them out right on the car. I didn't remove the coupe bumper. Then used thier clamps to hold them in.


<font color=blue>'03 Brilliant Silver w/ Graphite Leather Performance Premium Aerokit </font color=blue>