G35 Needed In Nashville,TN to test fitment;)
#1
Guest
Posts: n/a
G35 Needed In Nashville,TN to test fitment;)
Hiya all,
Looking for some crazy HP seekers for the G35Sedan, G35 Coupe in the Nashville,TN area. We have a header over here that fits the 350Z.
It is possible this header will fit a G35 Crossing my fingers.Since this car is non turbo, trying to configure every mod to gain the most hp as possible
We have found that the gains are drastic in the 6,000 to 6500 range. This is just with headers and no other mods
Like I said if your crazy and are located in this area please PM me.
thanks guys!
Yuichi
Looking for some crazy HP seekers for the G35Sedan, G35 Coupe in the Nashville,TN area. We have a header over here that fits the 350Z.
It is possible this header will fit a G35 Crossing my fingers.Since this car is non turbo, trying to configure every mod to gain the most hp as possible
We have found that the gains are drastic in the 6,000 to 6500 range. This is just with headers and no other mods
Like I said if your crazy and are located in this area please PM me.
thanks guys!
Yuichi
#2
#3
Registered User
iTrader: (3)
Join Date: Apr 2003
Location: Tuscaloosa/Orange Beach, AL
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Re: G35 Needed In Nashville,TN to test fitment;)
Hey, Im in Memphis TN and have a coupe on order from Infiniti of Nashville. I would love to try out the new headers, but I don't get the car in until June, and then it needs broken in before any dyno pulls, but if you are just looking for test fitment then that would work. You will probably find someone else before June, but if you don't let me know.
Laser Red, Graphite, 6MT due June
Laser Red, Graphite, 6MT due June
#4
#6
Re: G35 Needed In Nashville,TN to test fitment;)
I don't understand why the +15.1hp @ 6400revs is "significant": the peak HP is at 6100-6200. by 6400, the hp and tq curve are both falling drastically. the power band is over by 6200, who cares what the hp/tq gains are @ 6400? to really show the 'impressive' results, you should've compared the 10tq gain @ 3750revs. SOTP feel is all about tq. How much is this header? 10lb-ft of tq gain @ such low revs (for a strung out NA motor) is pretty sweet.
=============
90 Miata 140K mi
02 Saab 9-3
=============
90 Miata 140K mi
02 Saab 9-3
#7
Re: G35 Needed In Nashville,TN to test fitment;)
Have an idea...Stock manifolds, Extrude Honed for about ...I guess $500?? Beats $1200 for a new set of headers. I don't think there is enough gain here. Howeve, this IS with the stock exhaust. Let's wait and see what it does with HP exhaust and intake...
Thread
Thread Starter
Forum
Replies
Last Post
netcbc
Steering & Suspension CDN
0
07-24-2015 11:25 AM