over 300 at church's.. i hear it read high.. but hey.. i'll take it...

 

Nice

 

Updated pictures with the funnel. The funnel helps so much. All it all easy and great mod.

When to a local auto store, bought the liter funnel. Pulled the vacuum hose out. Threaded the funnel on the hose and installed the hose back into the car.

 

Interesting. This is basically like turning your G airbox into a 350Z airbox. If I were to do it, I'd probably use a rectangular opening (2" X 3") and I'd block off flow to the over OEM over radiator intake. You don't really need three seperate air sources. Nice setup though.

 

^ Rectangular? But the tubing would be round?

And that funnel is not doing anything, you need to move it up to the lip. The Funnel is collecting air on the base of the tube.

 

thanks for the right up

 

the stock air intake is already a cold air set-up. it is really well designed.

 

^hahaha

 

i was gonna buy a short ram but i think i'll try this out first

 

300 na at churches isn't hard.. his dyno reads around 30 higher than normal from what I've gathered.

 

Did you ever get a chance to Dyno this mod on your intake Dyno day

 

nope..

 

What about the flexable hose for a clothes dryer. should be like 3 -3 1/2" diameter?

 

OMG NICE WRITE UP!!! hahaha going HAVE to do this now. thanks

 

Anybody notice a difference in sound or have a before/after sound clip?