Does anyone have the actual BCM Control Module Customization Chart that they could post or link? The link under the DIY thread is dead.

 

I re-uploaded the BCM Mod Charts to the FAQ Thread. Hope this helps.

 

So shoot me, but i can't figure out which does what in that diagram.

Is there an option for the car to lock after putting it into Drive?

 

No. That requires an aftermarket device. See KP Technologies.

 

I have a non-premium vehicle (no auto on/off headlights) and I would like to have the headlights turn off automaticly when I shut the car off. Is the possible?

On the BCM chart, under the Head Lamp Battery Saver Set row, the option states "Exterior amp battery saver can be turned off in work support."

However, another previous post indicated:

Head Lamp Battery Saver (applies when headlights left in “on” position, not in “auto.”
Mode 1: Shuts lamps off after 5 minutes
Mode 2: No time delay (headlights turn off immediately)

These two appear to conflict with each other. If the "amp battery saver is turned off" I would think the headlights would stay on after the 5 minute delay and not achieve my goal. However, the description states that the "headlights turn off immediately." Which is right or am I reading it wrong?

Thanks!