my 05 g35 sedan just had the driver side valve cover replaced they put everything back together and the car wont start I took it to infiniti got new key programmed to see if it was that but it wasn't so they put it on the computer and its not showing any codes and they don't know what it could be took it back home and tried starting it with starter fluid and turns on for a sec or two sputtering can anybody help me

 

Not enough gas in tank?

Fuel pump?

Test fuel pressure

Telcoman

 

full tank but supposable it doesn't have an injector pulse that what one mechanic told me not sure

 

Find a qualified mechanic that can read and follow the FSM

http://www.nicoclub.com/FSM/G35/Seda...5_Sedan/fl.pdf

http://www.nicoclub.com/FSM/G35/Seda...5_Sedan/ec.pdf

See page EC-676

If all injectors are failing did you check for a blown fuse?

Telcoman

 

yes all fuses are good and relays also.

 

I just had this issue. I thought it was the fuel pump at first. Come to find out my gas gauge wasn't working properly and I didn't have enough gas.

I wish the gas gauge issue would be figured out already. Not even the Infiniti in my area knows what to do except to replace my entire cluster. Eff that.

 

I wish it would be just that but that thing is filled up to the top

 

I'd take off the lower back seat and see if the fuel pump is even engaging. The fuel pump is pretty cheap to replace and shouldn't take you more than 2 hours to replace...

 

yea its kicking on

 

I would recheck how the hoses and vacuum lines are put back to make sure they go in the right place/order. Good luck!

 

Did you check the fuel pump pressure with a pressure gauge?

Telcoman