Engine, Drivetrain & Forced-Induction Have Technical Questions or Done Modifications to the G35? Find out the answer in here! (View All Posts)
Sponsored by:
Sponsored by: CARiD

Need help diagnosing super lean during closed loop

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Yesterday | 05:52 AM
  #1  
35zabe's Avatar
Thread Starter
|
Registered User
Joined: May 2026
Posts: 1
Likes: 0
Need help diagnosing super lean during closed loop

Hello, so I have an issue with my 2006 g35 coupe where it runs completely fine during open loop not reading off 02 sensors but as soon as it goes into closed loop and starts reading 02 data the air fuel ratio will go up to 18s at idle and it will start Misfiring with a random misfire code. No other codes just the misfire code and after doing that for a bit will drop the afr super low run somewhat okay for a couple seconds then go back up and start missing again. When the 02 fuse is pulled it runs completely fine.

Ive replaced my 02 sensors, mass airflow, and don’t have any exhaust leaks and I don’t have vaccum leaks as far as I can tell. Just wondering if anyone has run into this problem and if anyone had any suggestions on what it could be?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ab.1way
G35 Coupe V35 2003 - 07
7
Sep 2, 2025 11:16 PM
thatski
G35 Sedan V36 2007- 08
10
Dec 30, 2024 11:28 AM
HyLowz
G35 Coupe V35 2003 - 07
5
May 13, 2023 11:32 PM
DumpsterJedi
G35 Coupe V35 2003 - 07
8
Jun 22, 2018 08:50 PM
Jacobk4508
Engine, Drivetrain & Forced-Induction
2
Feb 7, 2017 12:08 PM



You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 01:30 AM.