Will ARC oil pan fit G35X?
Go to your local Infiniti dealer's parts department and see if the pan's are the same part numbers for the RWD G and the X. That will give you your answer. Oh and have your vin number and one off a RWD G on their lot cause they will most likely ask for that.
Thanks. Will the extra large lower oill pan (eg: ARC, or APE) hit any thing around (eg: oil filter, or the AWD system)?
Originally Posted by ChicagoX
If it is just the lower pan, it should fit. If it the whole assembly, it will not fit.
The G35X has a special pan where the front half-shafts pass directly through it.
W.
The G35X has a special pan where the front half-shafts pass directly through it.
W.
Don't drink and Mag Race
Joined: Mar 2004
Posts: 2,065
Likes: 3
The oil filter assembly is placed on the side of the pan, so I don't see any reason for interference. Looking at the underside, it looks like the only drawback would be a small decrease in ground clearance. I was considering the JWT pan spacer to increase oil volume and they assured me it would fit. I don't know if the other pans have a different shape, but the Greddy and the JWT should fit, IMHO.
Good luck!
W.
Good luck!
W.
Thank you 
Originally Posted by ChicagoX
The oil filter assembly is placed on the side of the pan, so I don't see any reason for interference. Looking at the underside, it looks like the only drawback would be a small decrease in ground clearance. I was considering the JWT pan spacer to increase oil volume and they assured me it would fit. I don't know if the other pans have a different shape, but the Greddy and the JWT should fit, IMHO.
Good luck!
W.
Good luck!
W.
Thread
Thread Starter
Forum
Replies
Last Post
Jiggerjuice
Brakes & Suspension
9
Oct 5, 2015 02:33 PM
