Cam shafts?
#1
Joined: Dec 2005
Posts: 472
Likes: 0
From: North Jersey
#3
I have the Nismo cams and valve springs on my Vorteched G35 . I couldnt tell you about them for N/A set up . As I had them put on after the SC .The vacuum will drop and you'll have a idle problem . There are several fixes [ not really fixes ] You can raise the idle , drill a 1/16 hole in the throttle plate , And T off the vacuum line on the TB and run it to crank case breather hose .I would sugest getting te strongest valve springs you can get . You will be able to rev higher
#4
Joined: Dec 2005
Posts: 472
Likes: 0
From: North Jersey
Thanks, I am also going with the Vortech. What other mods do you have that compliment your SC? See Im trying to get everything I need (and want ) before May. So far besides my intake, exhaust, plenum spacer, headers, the only other thing I can think of are cams (not to crazy about going with test pipes). Then once I get the SC installed, I'll get a VB upgrade. Anything I'm missing?
Thread
Thread Starter
Forum
Replies
Last Post
THMotorsports
Suspension-Vendor
257
12-18-2018 05:43 PM
n2fooz
Engine, Drivetrain & Forced-Induction
0
09-04-2015 07:46 PM