I am buying a used crawfordz plenum. What must I make sure comes with it other than the plenum itself?

 

just say NO to used engine parts.

 

why?

 

Are your gaskets still ok? You might want to get a new when you change to the new plenum.

 

I have less than 25,000 miles, shouldn't my gaskets be ok?

 

i would say plenum is okay, but it all depends on the price that you are getting. If it is more than $200, I would say why not go with the MD spacer?

 

I like the look of the crawfordz plenum in black. I can get it for $250. please give me any input because I don't want to buy it you anyone thinks it will be a bad idea. I originally thought it would be a good idea.

 

1- upper plenum
1-long bolt 80mm
1-long bolt 70mm
2-Nylon washers for use with the two long bolts above
4-short bolts
2-wire loom clamps
2-small nuts (for use with the two wire loom clamps)

heres a link for the install manual

http://crawfordz.com/support/PlenumInstallation.pdf

 

you might wanna double up the gaskets.

 

thanks techi that is perfect

 

it is that much extra cost...+ 250, why don't you just buy a MD spacer?
or AAM spacer? ..

just my 2 cents

 

4-short bolts
2-wire loom clamps
2-small nuts (for use with the two wire loom clamps)

^^^are these important? the seller says that he doesn't have these???

 

bump

 

the loom clamps and the two nuts for the loom clamps, you can do without, but the 4 short bolts IMO are necessary for proper install (they are used inside the plenum, not sure how easy it will be to find new ones)

check the install guide and you'll see what you need em for

 

Well, you already know my standpoint

I'll never buy used parts - when I had my old mustang, my friends would also try to save a few hundred $$$ buy buying used pulleys and gears....95% of the time their ideas blew up in their face a few months later. I've seen just how 'good' used parts are, but that's just me.