FS: ARC air induction box and intake tube
Joined: Jun 2003
Posts: 14,505
Likes: 451
From: NorCal
Category: Engine - Intake/Fuel
Price: SOLD
Location (Region): NorCal
Part fits (select ONLY those that apply): 2003-2007 G35 Coupe, 2003-2006 G35 Sedan
Item Condition: Used
Tire/Wheel Type: 28" DONK
SOLD
ARC induction box, filter and polished, branded intake tube (also throwing in a red Oznium 1-watt LED - see last pic)
Filter is like new. Intake tube has a few small scratches on it on the visable side.
One of the threaded sleeves on the filter adapter got stripped. I've since removed it and replaced it with a bolt and nut. All that needs to be done when bolting it down is to remove the top cover of the air box and tighten the nut from inside the box. I am ordering all new bolts so they all match again. See pic of sleeve below
All polished and wraped up and ready to ship










Stripped sleeve that has been removed and replaced with a bolt and nut

Red LED
Price: SOLD
Location (Region): NorCal
Part fits (select ONLY those that apply): 2003-2007 G35 Coupe, 2003-2006 G35 Sedan
Item Condition: Used
Tire/Wheel Type: 28" DONK
SOLD
ARC induction box, filter and polished, branded intake tube (also throwing in a red Oznium 1-watt LED - see last pic)
Filter is like new. Intake tube has a few small scratches on it on the visable side.
One of the threaded sleeves on the filter adapter got stripped. I've since removed it and replaced it with a bolt and nut. All that needs to be done when bolting it down is to remove the top cover of the air box and tighten the nut from inside the box. I am ordering all new bolts so they all match again. See pic of sleeve below
All polished and wraped up and ready to ship










Stripped sleeve that has been removed and replaced with a bolt and nut

Red LED
Last edited by G35Papa; Mar 8, 2011 at 08:02 PM.
Did you use anything to polish your Arc intake tube? I have the same one and it's dull compared to yours, was wondering if there was a safe way to shine it up without removing the etched design.
Thanks, and GLWS!
Thanks, and GLWS!
Joined: Jun 2003
Posts: 14,505
Likes: 451
From: NorCal
I used Blue Magic but any polish will due. It's hard to not remove the etching. It is just prone to dull over time.
FYI...I won't hold this, if you are interested, please be ready to pay.
Thanks
FYI...I won't hold this, if you are interested, please be ready to pay.
Thanks






