FS[NorWest]: JWT 530BB TT Kit + Custom Single FMIC/Piping
#1
Join Date: Jun 2008
Location: Richland, WA
Posts: 711
Likes: 0
Received 0 Likes
on
0 Posts
JWT 530BB TT Kit + Custom Single FMIC/Piping
EDIT: SOLD
Sold the G35 finally and still have a ton of stuff laying around from 2 years ago that I bought but never installed.
So for this post we have a JWT 530BB TT kit that I purchased but never installed. It is used and has about 10,000 miles on it between two owners. It was first on a 350Z and then on a G35. It has worked with both cars because the original owner customized the kit by getting rid of the JWT twin intercooler setup in favor of a large FMIC. This is a great solution for G's that have an aftermarket bumper. (I bought it because I was running a kuruma Z front so it would have looked and worked great).
Included in this kit is pretty much everything you see in the pictures:
Both turbos, the exhaust manifolds, heat shields, piping, intercooler, couplers, hoses, oil pan spacer etc.
I didn't notice any shaft play with the turbos. The only real negative here is that some of the I/C fins were bent a bit during shipping. It didn't look too bad to me so I was going to install it the way it is. You can see the damage in one of the pictures. Also, the intake pipe that is normally polished aluminum is scratched up. Either get it repolished or paint it black, your call.
When I purchased the kit the guy I bought it from said I'd need to buy some new exhaust manifold bolts. I didn't think this was a huge deal. You'll have to do the same since I never installed it on my car or bought the bolts.
You'll also need a new air filter from JWT (obviously wouldn't want a used one).
This is for the DE motor.
Right now everything is boxed up in a giant box as I was getting ready to ship it, but if you are local enough that you would like to come pick it up I can cut you a deal!
Questions? Hit up my e-mail andrew.stach@gmail.com
My g35driver inbox is always full and now that I sold the car I don't check the forums as much as I used to.
Sold the G35 finally and still have a ton of stuff laying around from 2 years ago that I bought but never installed.
So for this post we have a JWT 530BB TT kit that I purchased but never installed. It is used and has about 10,000 miles on it between two owners. It was first on a 350Z and then on a G35. It has worked with both cars because the original owner customized the kit by getting rid of the JWT twin intercooler setup in favor of a large FMIC. This is a great solution for G's that have an aftermarket bumper. (I bought it because I was running a kuruma Z front so it would have looked and worked great).
Included in this kit is pretty much everything you see in the pictures:
Both turbos, the exhaust manifolds, heat shields, piping, intercooler, couplers, hoses, oil pan spacer etc.
I didn't notice any shaft play with the turbos. The only real negative here is that some of the I/C fins were bent a bit during shipping. It didn't look too bad to me so I was going to install it the way it is. You can see the damage in one of the pictures. Also, the intake pipe that is normally polished aluminum is scratched up. Either get it repolished or paint it black, your call.
When I purchased the kit the guy I bought it from said I'd need to buy some new exhaust manifold bolts. I didn't think this was a huge deal. You'll have to do the same since I never installed it on my car or bought the bolts.
You'll also need a new air filter from JWT (obviously wouldn't want a used one).
This is for the DE motor.
Right now everything is boxed up in a giant box as I was getting ready to ship it, but if you are local enough that you would like to come pick it up I can cut you a deal!
Questions? Hit up my e-mail andrew.stach@gmail.com
My g35driver inbox is always full and now that I sold the car I don't check the forums as much as I used to.
Last edited by visibiliti; 01-25-2012 at 04:49 PM.
Trending Topics
#9
If someone is interested in wanting the dual intercooler setup i have it on my sedan and would swap for the single setup. Looks like just swap the intercooler and a few pipes
#10
Registered User
iTrader: (4)
Is there a manual that comes with this setup that I can use as a reference to double check the installation if need be. Are all the parts there? (clamps, silcone hoses, oil lines etc) Besides EMS,injectors and a few bolts? I would mind a trade for that twin intercooler setup. Trying to keep that 06 sport front bumper
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
Thread
Thread Starter
Forum
Replies
Last Post
yosip1115
Forced Induction
8
01-28-2016 02:51 PM
paolojericho11
G35 Coupe V35 2003 - 07
0
08-16-2015 05:08 PM