Selling my old turbo setup. Turbos were upgraded by Forced Performance back in 2006 and have Garret GT28RS wheels in the greddy housings. Turbine housings have vbands welded on and 3" down pipes with vband outlets. Compressor outlet has been welded on passenger side so you dont have to worry about a silicone coupler like on the stock kit. I will included the oil drain lines as well. Tial 38mm waste-gates that have been recirc'd into the downpipes. Hot parts are ceramic coated as well.

I also have a set of solid motor mounts and the factory mounts that have been clearenced for full 3" intake piping to the turbos. Intake piping means that it is the pipe that goes from a filter to the inlet of the turbo. This is not all the intercooler piping that people keep asking me about. To do this though you have to remove the a/c compressor and move the power steering pump to the driver side. If someone is interested I have the 3" intake piping setup as well that I could sell this would be an additional $150.

Here is the only shot I could find of the intake piping on my car.



With the 3" intake piping these turbos made 844whp@26psi on my car.








Looking for $1000.

People asking for best price will be ignored.

People asking what it needs to be a complete kit will be ignored. Whats its in the picture is what you get.

 

can you call me I got questions about it 432 425 7201


Posted from G35driver.com App for Android

 

I am a serious buyer have not heard nothing back please call me are the turbos in good condition are they any cracks in a manifold or the piping please contact me a asap thank you


Posted from G35driver.com App for Android

 

sale pending

 

i paid for it thank you look at PayPal did you see the message


Posted from G35driver.com App for Android

 

sold...